Bedienungsanleitung Parkside PSKO 24 A1 - IAN 354867 (Seite 19 von 32) (Deutsch, Englisch)

763012

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

15GB

Please observe that our equipment was not designed with the

intention of use for commercial or industrial purposes. We as-

sume no guarantee if the equipment is used in commercial or

industrial applications, or for equivalent work.

6. Safety information

m Attention!

The following basic safety measures must be observed when

using power tools for protection against electric shock, and the

risk of injury and ﬁre. Read all these notices before using the

electric tool and store the safety instructions well for later refer-

ence.

Safe work

1. Keep the work area orderly

- Disorder in the work area can lead to accidents.

2. Take environmental inﬂuences into account

- Do not expose power tools to rain.

- Do not use electric tools in a damp or wet environment.

There is a risk of electric shock!

- Make sure that the work area is well-illuminated.

- Do not use power tools where there is a risk of ﬁre or

explosion.

3. Protect yourself from electric shock

- Avoid physical contact with earthed parts (e. g. pipes,

radiators, electric ranges, cooling units).

4. Keep away from children!

- Do not allow other persons to touch the equipment or

cable, keep them away from your work area.

5. Securely store unused electric tools

- Unused power tools should be stored in a dry, elevated

or closed location out of the reach of children.

6. Do not overload your power tool

- They work better and more safely in the speciﬁed output

range.

7. Dress properly

- Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

- Rubber gloves and anti-slip footwear are recommended

when working outdoors.

- Tie long hair back in a hair net.

8. Do not use the cable for purposes for which it is not

intended

- Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

9. Take care of your tools

- Keep your compressor clean in order to work well and

safely.

- Follow the maintenance instructions.

- Check the connection cable of the power tool regularly

and have it replaced by a recognised specialist when

damaged.

- Check extension cables regularly and replace them

when damaged.

10. Pull the connector out of the socket

- When the electric tool is not in use or prior to

maintenance and when replacing tools such as saw

blades, bits, milling heads.

11. Avoid inadvertent starting

- Make sure that the switch is switched oﬀ when plugging

the plug into an outlet.

12. Use extension cables for outdoors

- Only use approved and appropriately identiﬁed

extension cables for use outdoors.

- Only use cable reels in the unrolled state.

13. Always remain attentive

- Pay attention to what you are doing. Remain sensible

when working. Do not use the power tool when you are

distracted.

14. Check the power tool for potential damage

- Protective devices or other parts with minor damage

must be carefully inspected to ensure that they function

correctly and as intended prior to continued use of the

electric tool.

- Check whether the moving parts function faultlessly and

do not jam or whether parts are damaged. All parts

must be correctly mounted and all conditions must be

fulﬁlled to ensure fault-free operation of the electric tool.

- Damaged protective devices and parts must be properly

repaired or replaced by a recognised workshop, insofar

as nothing diﬀerent is speciﬁed in the operating manual.

- Damaged switches must be replaced at a customer

service workshop.

- Do not use any faulty or damaged connection cables.

- Do not use any electric tool on which the switch cannot

be switched on and oﬀ.

15. Have your power tool repaired by a qualiﬁed electrician

- This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise

accidents can occur.

16. Attention!

- For your own safety, only use accessories and additional

equipment that are indicated in the operating manual

or have been recommended or indicated by the

manufacturer. Use of other tools or accessories that

those recommended in the operating manual or in the

catalogue could represent a personal danger to you.

17. Noise

- Wear hearing protection when using the compressor.

18. Replacing the connection line

- If the connection line is damaged, it must be replaced

by the manufacturer or an electrician to avoid danger.

There is a risk of electric shock.

19. Filling tyres

- Directly after inﬂating tyres, check the pressure with

a suitable pressure gauge, for example at your ﬁlling

station.

20. Street-legal compressors in construction site operation

- Ensure that all hoses and ﬁxtures are suitable for

the maximum permissible working pressure of the

compressor.

21. Set-up location

- Only set up the compressor on a ﬂat surface.

22. In case of pressures above 7 bar, it is recommended

to equip supply hoses with a safety cable (e. g. a wire

rope).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSKO 24 A1 - IAN 354867 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info