Bedienungsanleitung Parkside PSKO 24 A1 - IAN 354867 (Seite 20 von 32) (Deutsch, Englisch)

763012

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

16 GB

23. Avoid over-stressing the piping system by using ﬂexible

hose connections to prevent kinking.

24. Use a residual current circuit breaker with a trigger

current of 30 mA or less. Using a residual current circuit

breaker reduces the risk of an electric shock.

Additional safety instructions

Observe the corresponding operating manuals of

the respective compressed air tools / compressed

air attachments! The following general warnings must also

be observed.

Safety instructions for working with compressed

air and blasting guns

• Ensure there is suﬃcient distance to the product, at least

2.50 m, and keep the compressed air tools / compressed

air attachments away from the compressor during operation.

• The compressor pump and lines can become very hot during

operation. Touching these parts will burn you.

• The air which is sucked in by the compressor must be kept

free of impurities that could cause ﬁres or explosions in the

compressor pump.

• When releasing the hose coupling, hold the hose coupling

piece with your hand. This way, you can protect yourself

against injury from the rebounding hose.

• Wear safety goggles and a respirator when working with

the compressed air pistol. Dusts are harmful to health!

Injuries can be easily caused by foreign objects and blown

away parts.

• Do not blow at people with the blow-out pistol and do not

clean clothes while being worn. Danger of injury!

Safety instructions when using spraying

attachments (e.g. paint sprayers)

• Keep the spray attachment away from the compressor when

ﬁlling so that no liquid comes into contact with the compressor.

• Never spray in the direction of the compressor when using

the spraying attachments (e.g. paint sprayers). Moisture can

lead to electrical hazards!

• Do not process any paints or solvents with a ﬂash point be-

low 55 °C. Risk of explosion!

• Do not heat up paints or solvents. Risk of explosion!

• If hazardous liquids are processed, wear protective ﬁlter

units (face guards). Also, adhere to the safety information

provided by the manufacturers of such liquids.

• The details and designations of the Ordinance on Hazardous

Substances, which are displayed on the outer packaging

of the processed material, must be observed. Additional

protective measures are to be undertaken if necessary,

particularly the wearing of suitable clothing and masks.

• Do not smoke during the spraying process and/or in the

work area. Risk of explosion! Paint vapours are easily

combustible.

• Never set up or operate the equipment in the vicinity of a ﬁre

place, open lights or sparking machines.

• Do not store or eat food and drink in the work area. Paint

vapours are harmful to your health.

• The work area must exceed 30 m³ and suﬃcient ventilation

must be ensured during spraying and drying.

• Do not spray against the wind. Always adhere to the

regulations of the local police authority when spraying

combustible or hazardous materials.

• Do not process media such as white spirit, butyl alcohol and

methylene chloride with the PVC pressure hose. These media

will destroy the pressure hose.

• The work area must be separated from the compressor so that

it cannot come into direct contact with the working medium.

Operation of pressure vessels

• Anyone who operates a pressure vessel must keep this

in good working order, operate and monitor it correctly,

perform the necessary maintenance and servicing works

immediately and implement safety measures as required

according to the circumstances.

• The regulatory authority can instruct necessary monitoring

measures in individual cases.

• A pressure vessel must not be operated if it exhibits a defect

that poses a danger to personnel or third parties.

• Check the pressure vessel for rust and damage each time

before use. The compressor shall not be operated if the

pressure vessel is damaged or rusty. If you discover damage,

please contact the customer service workshop.

Keep these safety instructions in a safe place.

Residual risks

Comply with the stipulated maintenance and safety instructions

in the operating instructions.

Remain attentive at all times when working, and keep third

parties at a safe distance from your work area.

Even when the device is being used properly, there will always

be certain residual hazards that cannot be completely ruled

out. The following potential hazards can arise due to the type

and design of the device:

• Unintentional starting up of the product.

• Damage to hearing if the stipulated hearing protection is not

worn.

• Dirt particles, dust etc. can get irritate the eyes or face

despite wearing safety goggles.

• Inhaling swirled up particles.

Warning!

This power tool generates an electromagnetic ﬁeld during

operation. This ﬁeld can impair active or passive medical

implants under certain conditions. In order to prevent the risk

of serious or deadly injuries, we recommend that persons

with medical implants consult with their physician and the

manufacturer of the medical implant prior to operating the

power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSKO 24 A1 - IAN 354867 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info