Bedienungsanleitung PerfectPro Workstation (Seite 5 von 36) (Deutsch, Englisch, Holländisch, Französisch)

742531

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

7 8

USING THE RADIO FOR THE FIRST TIME

1. Placetheradioonaatsurface.

2. Carefully extend the antenna located on the top of the radio. Adjust the antenna so

it is vertically extending above the radio.

3. Plug the AC power cord into the AC socket. The radio will start up and the display

will show “WELCOME TO DIGITAL RADIO” for a few seconds. Then the radio will

automatically perform an auto scan of the Band III DAB channels and the FM band.

The display will show “Scanning” in DAB and “Auto” in FM.

4. When the scan is completed, the 10 strongest FM stations will be stored as presets

and the available DAB stations will be in the list of stations. The radio will switch to

standby with the updated clock and date showing on the display.

5. If no signals are found, the clock will not be updated. It may be necessary to

relocate the radio to a position with better reception.

DAB MODE (DAB/DAB+)

Operating the radio – DAB

1. Carefully extend the antenna. Press the On/Off button to switch on the radio.

2. Select the DAB waveband by pressing the Source button.

3. Therststationinthelistofstationsfoundwillbeplayed.Thedisplaywillshow

the station name. If the radio has been used before, the last used station will be

selected.

4. If no DAB signals are detected, “No stations available” will be displayed. It may be

necessary to relocate the radio to a position with better reception. You should

 thencarryoutanautoscantondstations,pleaserefertothesection“Find new

stations - DAB”.

Selecting a station – DAB

1. Press the On/Off button to switch on the radio.

2. Select the DAB waveband by pressing the Source button.

3. The display will show “Now tuning” for a few seconds.

4. The display shows the name of the radio station currently selected.

5. Rotate the Tuning knob to scroll through the list of available stations.

6. When the desired station name appears on the display, press the Tuning knob

to select the station.

Note: If after selecting a station the display shows “No stations available”, it may be

necessary to relocate the radio to a position with better reception.

Display modes – DAB

In DAB mode, the radio can display a range of information on the display. Press the Info

button to cycle through the various modes.

a. Scrolling text Displays scrolling text message e.g. station information,

artist/track name, phone-in number, etc.

b. Signal strength Displays the signal strength of radio reception. The

  clearunlledrectangleindicatesminimumsignallevel

required for satisfactory reception.

c. Program type Displays the type of station being listened to e.g. Pop,

Classic, News, etc.

d. Multiplex name Displays the name of multiplex to which the current

station belongs.

e. Channel & frequency Displays the channel number and frequency for the

currently tuned DAB station.

f. Bit rate & audio format Displays the digital audio bit rate and audio format.

g. Time & date Displays the current time and date.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Workstation Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info