Bedienungsanleitung PerfectPro Workstation (Seite 7 von 36) (Deutsch, Englisch, Holländisch, Französisch)

742531

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

11 12

Scan sensitivity setting – FM

The radio will normally scan all stations from FM broadcasts including the weaker

signals.However,youmaywishtheAuto-scantondonlythosestationswithstrong

enough signals to give good reception.

1. Press the On/Off button to turn on the radio.

2. Select the FM band by pressing the Source button.

3. Press the Menu button, the display shows “Scan setting”.

4. Press the Tuning knob.

5. Rotate the Tuning knob to select between “All stations” or “Strong station”

 (defaultis“Allstations”).The“Strongstation”optionwillallowtheradiotond

strong signals only when scanning.

6. Press the Tuning knobtoconrmyoursetting.Thedisplaywillreturnto 

normal radio display.

PRESET STATIONS

Storing preset stations

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are

remembered by the radio in the event of a power failure.

1. Press the On/Off button to turn on the radio.

2. Press the Source button to select the desired waveband.

3. Tune to the required station.

4. Press and hold the required Preset button until the radio beeps and shows “Saved”.

5. Repeat step 3 and 4 for the remaining presets.

6. Stations stored in the preset memories can be over-written by following the

above procedure.

Recalling preset stations

1. Press the On/Off button to turn on the radio.

2. Press the Source buttontoselectthedesiredwaveband.BrieyPresstherequired

Preset button.

3. In FM mode the display will show for example ”P1” on top right hand side.

MANUALLY SETTING CLOCK

The clock can only be manually set when the radio is in standby mode. If no buttons are

pressed for 5 seconds, the radio will exit the clock setup and the setting is cancelled.

1. PressandholdtheTimeSetknobfor12secondsuntilthehourdigitsashonthe

display.

2. Rotate the Time Set knob to set the hour.

3. Press the Time Set knobtoconrm,theminutedigitsash.

4. Rotate the Time Set knob to set the minute.

5. Press the Time Set knobtoconrm,thedayashesonthedisplay.

6. Rotate the Time Set knob to set the current day.

7. Press the Time Set knobtoconrm,themonthashes.

8. Rotate the Time Set knob to set the current month.

9. Press the Time Set knobtoconrm,theyearwillthenashonthedisplay.

10. Rotate the Time Set knob to set the current year.

11. Press the Time Set knobtoconrm,“SYNCLOCKON”ashes.

12. Rotary the Time Set knob to select “SYNCLOCK ON” or “SYNCLOCK OFF”.

13. Press the Time Set knobtoconrmandnishtheclocksetting.

RDS time synchronisation

If “SYNCLOCK ON” is selected, the symbol “ ” will show on the clock display. Some

RDS stations transmit a time signal. If reception is good and you have selected the

“SYNCLOCK ON” option during the time setting, the time will be automatically updated

(“ ”ashesonthedisplay).Timesynchronizationcantakeseveralminutes.The

automatic time setting is always activated when the radio is switched from standby to

FM broadcasting and receives a RDS station.

OPERATING THE RADIO – AUX IN

A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for

connecting an external audio device such as MP3 player or CD player (not included).

1. Connect a stereo or mono audio source to the Aux In socket.

2. Press the Source button to select AUX input. Display will show “AUX IN”.

3. Play the external player.

4. Adjust the volume of both the radio and the player for comfortable listening.

Notes: Never use the Aux-In socket in rainy or moist conditions to prevent moist from

entering the radio. Keep the rubber cover well closed under these conditions.

The Auto-Power management function will be activated in AUX IN mode. If there

is no signal* from the Aux-In socket for a period of over 15 minutes, the radio will

automatically switch to standby mode. Pressing the On/Off button will wake up the unit.

* Also when the incoming signal from the external device is too low and cannot be

detected for a period of over 15 minutes by the Auto-Power management, the radio will

switch to standby mode.

To prevent this raise the output level of the external device enough to be detected.

LOUDNESS

The Loudness function enables to get compensation on lower and higher frequency.

The effect will be more audible when the radio is on a lower volume level (Dynamic

Loudness).

1. Press the On/Off button to turn on the radio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro Workstation Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info