Bedienungsanleitung Philips 70fc566 (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

780732

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The fast winding, pause, play and stop modes

remain possible during the idex scan process:

• When listening to a lOseconds fragment, you

can wind to the next part. Just press the '»' @ or

'«'

® button in accordance with the 'REVERSE

MODE BH' indicator.

• When pressing the fast winding button in the

direction opposite to the scanning direction (in-

dicated by the 'REVERSE MODE BH' indicator),

the beginning of the previous fragment will be

heard.

• When pressing the 'PAUSE' button during scan-

ning,

the tape will stop at the beginning of the next

fragment. When pressing the 'PAUSE' button

again,

the fragment will be heard, after which the

'INDEX SCAN' operation is continued.

• The 'INDEX SCAN' system can be stopped at any

moment by pressing the 'STOP' button @.

QUICK MUSIC SEARCH SYSTEM (QMS)

The Quicl< Music Search system enables you to

select directly a desired number or fragment on a

cassette by sl<ipping one or more numbers. First

determine how many fragments have to be skipped

before the desired passage is reached. Sl<ipping

can be done in both directions. Now press the QMS

button as many times as necessary to conform to

the number of fragments to be passed. This number

will show on the display. Entering the desired QMS

number may be done during the 'PLAY', 'PAUSE',

or 'STOP' modes, with a maximum of 15 number to

be passed.

Now press one of the fast wind buttons, depending

on the position of the desired fragment on the tape.

The decl< will then (re)wind to the beginning of the

desired fragment and switch to the 'PLAY' mode.

N.S.;The

QMS system reacts on silent passages of

at least 4 seconds on a recorded cassette. In some

cases a very faint passage in a piece of music can

be picl<ed up by the system as a 'silent' passage.

Recording silent passages tor the QMS system

Silent passages can be inserted automatically

between the recordings by pressing the 'REC

MUTE'

button @ after each number recorded.

There is then automatically a silent passage of

4 seconds after which the deck stops in the

record + pause mode.

RECORDING/PLAYBACK VIA TIMER

Timer switch (g) enables you to preset the recorder

in recording or playback position for use with a

timer.

When usinga programmable timer or any othertime

switch device which can be used to switch on the

mains voltage of a cassette deck, you can make a

recording (or play a cassette) while you are absent.

• Connect the mains lead of the recorder (and of

the tuner if you wish to record a radio programme)

to the timer and switch on the mains.

• Carry out all the necessary adjustments for

recording,

such as the recording leve! etc.

• Switch off the mains supply by setting the timer

unit in such a way that it will switch on again at the

desired time, see operating instructions of the

timer.

• The mains switch of the recorder (and of the

tuner) must not be switched off.

• Set timer switch (g) of the recorder to the desired

position (for recording or playback).

At the selected time the programme will be

recorded (or played back).

The cassette deck will be switched off automatical-

ly,

either through the automatic stop of the deck

itself, or through the timer unit, whichever operates

first.

• When coming home, timer switch (g) should be

set to the 'OFF' position before switching on the

mains.

Remark

When switching on the mains, using 'ON/OFF'

switch 0 or via a timer, the cassette deck will

always enter the mode of Fig. 7b. This means that

two sides of a cassette may be recorded (or played

back) while you are absent.

If you only want to record one side, then insert the

cassette with the full reel to the right and press the

' < PLAY' button @ and immediately afterwards the

'STOP'

button @, after which the 'REVERSE MODE

HB'

indicator indicates the direction '<1'.

GENERAL INFORMATION

COMPACT CASSETTES

• The tape in the cassette is fastened at both ends

with leader tape. You must fake this info account:

at the beginning of the cassette, nothing will be

recorded for 6 or 7 seconds!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 70fc566 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info