Bedienungsanleitung Philips CRYSTAL650 (Seite 58 von 80) (Englisch)

26364

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

58 2. Networks

PC Functions

Setting Up the Multifunction

Machine

Insert the WLAN adapter into the side USB port of

your machine.

e wireless adapter of your multifunction

machine transmits data via the wireless pro-

tocol IEEE 802.11g but can also easily be inte-

grated into an existing IEEE 802.11b network.

Use only an original adapter for connecting to

the multifunction machine (see order service on

the back page of this user manual). Other wire-

less adapters can damage the machine.

Regardless of whether you use your multifunction ma-

chine in an infrastructure or ad-hoc network, you must

conﬁgure certain network and security settings (e.g. the

Service Set ID (SSID) and the WEP key). e settings

must match the information for the network.

Setting the Network Type

Press MENU/OK and 912 to select the network

type. Use / to select Ad-hoc or Infrastruc.

(see the section Wireless networks). Conﬁrm with OK.

a If you select Ad-hoc, you will be asked to set the

radio channel for transmission (default is 10). You

can enter any channel if conﬂicts with nearby wire-

less networks arise. e radio channel must be the

same as the channel selected on the PC. Enter the

radio channel and conﬁrm with OK.

b If you select Infrastruc., you will be asked

to select the authentication mode. is speciﬁes

whether the multifunction machine authenticates

itself on the access point (gateway, router) with the

WEP key or whether the data should be encrypted

for transmission in the wireless network. e fol-

lowing options are available:

none—No authentication takes place and data is

transmitted unencrypted.

open—No authentication takes place, but data is

transmitted encrypted.

shared—e multifunction machine authen-

ticates itself on the access point (gateway, router)

with the entered WEP key, and data is transmitted

encrypted.

both—e authentication mode is selected arbi-

trarily by the machine.

Select a mode with / and conﬁrm with OK.

If you select open, shared or both, you

must enter a WEP key with the function

914.

Entering the Network Name (SSID)

Press MENU/OK and 913 to enter the network

name (Service Set ID, SSID). Enter the SSID and con-

ﬁrm with OK (default is Crystal_mfp). You can

ﬁnd the network name in the network settings of your

PC. e SSID must match the SSID on the PC or on

the access point.

Activating WEP Encryption

Unprotected wireless networks are accessible

to others! Always protect your network against

unauthorised access with the WEP (Wired

Equivalent Privacy) standard. You must use the

same WEP key on your multifunction machine

and on all connected PCs and the access point

(gateway, router).

WEP encryption is deactivated at the factory. Press

MENU/OK and 914. Use / to select 64 Bit

or 128 Bit. Conﬁrm with OK. Enter the WEP key

and conﬁrm with OK.

With 64-bit encryption, the WEP key must

be either 5 characters (ASCII) or 10 numbers

(hexadecimal). With 128-bit encryption, the

WEP key must be either 13 characters (ASCII)

or 26 numbers (hexadecimal). You can enter four

diﬀerent WEP keys. You can ﬁnd the WEP key

in the network settings of your PC.

Selecting the Connection Mode

With the connection mode, you set the IP address and

subnet mask. In an infrastructure network, you can se-

lect whether the settings should be made automatically

or whether you would like to manually enter the IP ad-

dress and subnet mask. In an ad-hoc network, you must

make the settings manually.

Press MENU/OK and 915 to select the connection

mode. Use / to select Auto (DHCP) or Manual

and conﬁrm with OK (default is Auto (DHCP), in an

ad-hoc network you must select manual).

e automatic conﬁguration of IP address

and subnet mask on the connected network

PCs may take a moment.

If you select Manual, you must manually enter the IP

address and subnet mask:

a e IP address is the address of the machine in the

network. It must be diﬀerent from the IP address

of the PC or other network components, but must

be within the same IP range. You can ﬁnd the IP

address in the network settings of your PC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips CRYSTAL650 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips CRYSTAL650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info