Bedienungsanleitung Philips DVDR80 (Seite 115 von 120) (Englisch)

1055

115

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

105

PROBLEM SOLUTION

Data transfer from TV

set via 'EASYLINK'

does not work:

bData transfer is controlled via pin nr. 10 of the scart cable. It is possible that the connection to

this pin is interrupted or that the signal is distorted by an additional device connected to the

EXT 2 AUX-I/O socket.

bRemove any scart switch boxes, mixing consoles, signal amplifiers, ... connected between the DVD

recorder and the TV set. Connect the DVD recorder directly to the TV set.

bRemove any additional devices from the EXT 2 AUX-I/O socket.

bTry using another scart cable (all pins wired).

bPlease observe the installation order:

1) Switch on the TV set

2) Connect the DVD recorder to the mains

3) Switch on the DVD recorder using STANDBY m

4) The data transfer should now work.

No playback on DVD

recorder:

bThere is no recording on the disc: Change disc.

bYou inserted the wrong disc type: Your recorder can play back the following disc types: DVD

Video, (Super)Video CD, DVD+R(W), Audio CD, , MP3-CD's

bYou inserted the disc the wrong way: Insert the disc with the label facing upwards

bDisc is dirty: Clean the disc

bWrong region code: The region code of the DVD and the DVD recorder must match.

bParental control is on: Read chapter 'Access control (child lock)'

bYou have selected the wrong programme number for the DVD recorder on the TV: on the TV,

select the correct programme number for the DVD recorder.

bThe cable connecting the TV set and the DVD recorder has come loose: check the cable.

I cannot playback

(Super) Video CDs

bIt is possible that this (Super) Video CD contains a menu and the 'PBC' is switched off. You can

see this in status field 'PBC OFF'. To activate this function, proceed as follows:

1 Press SYSTEM-MENU while the (Super) Video-CD is inserted .

2 Select '

' using D or C .

3 Select line 'Features' using P- B or P+ A and confirm with C .

4 Select 'On' in line 'PBC' using P- B or P+ A .

5 Confirm with OK and end with SYSTEM-MENU .

Poor playback on DVD

recorder: (distorted

picture/distorted

sound)

bYour TV set is not properly adjusted.

bDisc is dirty: Clean the disc

bSometimes the picture may be temporarily distorted. This is not a defect of your DVD recorder.

No recording possible:

bThe TV channel you want to record is not stored or you selected the wrong programme number:

Check TV channels stored.

bDisc write-protected (recording protected): Remove write-protection or change the disc. For

more information, please see 'Preventing accidental erasing of discs' in chapter 'Manual Recording'.

bAn already finalised DVD+R has been inserted: Change disc.

Programmed

recording does not

work:

bYou have programmed the wrong time or date: Check time/date.

bYou have not set the TIMER properly: Check the programmed recordings (TIMER block).

bLocked disc inserted: Remove disc lock.

bAn already finalised DVD+R has been inserted: Change disc.

b'VPS/PDC' switched on but 'VPS/PDCtime' wrong: 'Enter 'VPS/PDCtime exactly to the minute.

Check the aerial.

ENGLISH

Before you call an engineer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR80 Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info