Bedienungsanleitung Philips DVDR80 (Seite 116 von 120) (Englisch)

1055

116

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

106

PROBLEM SOLUTION

The wrong TV channel

was decoded (entered)

after you programmed

a recording using

VIDEO Plus+ System.

bThe programme number of the TV channel is not available in the GUIDE Plus+

system or

allocation is wrong.

To change or check the channel data, proceed as follows:

1 Press GUIDE/TV .

2 Press P+ A .

3 Select 'Editor' with C .

4 Select the TV channel using P- B or P+ A .

5 Press C to go to the right tile.

In case you can receive the selected channel only via an external receiver, press the red

button to select the corresponding source.

6 Press the green button.

7 Enter the programme number of the TV channel using the number buttons.

If the source you have selected is an external receiver, enter the programme number that

you would also enter at the external receiver for this TV channel.

8 Confirm with OK .

There is no channel

overview in the GUIDE

Plus+

system

bDVD recorder is switched on: Switch off the DVD recorder to allow data transfer

bThe TV channel that transmits the GUIDE Plus+

data is not set properly.

bExternal receiver (satellite receiver, set-top box, cable TV box, ...) (if available) is switched off:

switch on the external receiver

bG-LINK cable is not connected: Connect the G-LINK cable and make the necessary settings to

control the external receiver (see chapter 'The GUIDE Plus+

system', section 'Installation of the

'External receiver 1'').

Missing or wrong TV

channel in the 'Grid'

screen

bWrong local post code/country was entered

bPlease check your correct channel line up in the 'Grid' screen.

Read therefore the section 'The 'Editor' screen.

When you press

GUIDE/TV the GUIDE

Plus+

setup screen will

appear

bThe GUIDE Plus+

system was not completely installed or local post code was not entered.

1 Check the settings

2 Select the corresponding line using P- B or P+ A and confirm with OK .

3 For more information on the individual functions, see chapter 'The GUIDE Plus+

system',

section 'Installation of the 'External receiver 1''.

The external receiver

does not always react

to Remote control

signal.

bThe Infrared (IR) Remote control signal interfere with the IR signal of the G-LINK transmitter.

Put the G-LINK transmitter closer to the front of the external receiver.

My external receiver

switches automatically

through the TV

channels

bIf the DVD-Recorder is switched off ( STANDBY m button) the external receiver will be used

from the GUIDE Plus+

system via the DVD-Recorder. If you want to watch TV-Channels from

the external receiver, you have to switch the DVD-Recorder on.

There is picture or

sound interference on

TV reception:

bBefore recording, select the recording mode as described in chapter 'Manual Recording', section

'Selecting the recording mode (quality)'.

bHave your aerial checked.

bYou will find information on how to change the TV system in 'Manual TV channel search' in

'Installing your DVD recorder'.

Before you call an engineer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR80 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info