Bedienungsanleitung Philips FT565 (Seite 4 von 44) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

799038

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

for powerful local FM transmitters, is directional

and

sliould be

fitted

Inorizontally to

tiie

wall. zyxwvutsrqponmlkjihgfedcbaZYXWVUTSRQPONMLKJIHGFEDCBA

Note: In order to make

full

use of the tuning

facilities

of this tuner, connection to an external

aerial

or cable network is recommended.

(5) connection

screws

for the AM external aerial

and

earth, or AM frame aerial (Ê).

areas

where the frame aerial would give

unsatisfactory

results, connection of the tuner

to an

outdoor

aerial is recommended. Use the

connection screw marked 'AM' for this.

earth lead can be connected to the connec-

tion

screw marked 'G' to prevent any interfer-

ence.

(5) signal

output

sockets

For

plugging the connection cable

into

the

amplifier.

AM frame aerial

For

the reception of medium and long wave

transmitters (MW and LW transmitters). Attach

the frame aerial to the back of the tuner. The

wires

of the frame aerial must be connected to

connection

screws

©.

The

aerial is directional and must be positioned

for optimum reception.

Keep

it at some distance

from large metal objects and live wires.

For

connection of the RC-5 remote control

system.

lead.

CONTROLS

AND THEIR

FUNC-

TIONS

'ON/OFF'

switch

Note:

This

switch is only a secondary switch

and

connects the power supply. It is used to

ensure

that the information in the memory of the

pre-selected

transmitters is not lost.

'SCAN

LEVEL'

indicator

This

lights up if

button

'SCAN

LEVEL'

pressed.

'FM-NR'

indicator

This

lights up if

button

'FM-NR'

pressed.

This

lights up if

button

@ 'FM

AUTO

STEREO'

not

pressed.

The

display gives information about the tuning,

such

as:

'FM',

'MW' and 'LW' tuning range, frequency in

'kHz'

or 'MHz', memory location numbers 'PI'

to 'P16' and the indications

'MEMORY',

•STEREO'

and

'TUNED'.

It indicates the signal strength of the received

transmitter.

Tuning

is optimal when as many segments as

possible

light

up.

This

indicator should

especial-

ly be observed in

case

the transmitter frequen-

is unknown or when tuning indicator© offers

insufficiënt help (very weak transmitters or LW

reception).

'PRESET

STATION'

buttons for pre-selected

transmitters

For

calling up or programming pre-selected

transmitters.

If the

button

is pressed for a short time

(less

than 0.5

sec),

then the FM pre-selected transmit-

ters

1 to 8 can be

used.

If the

button

is pressed

for longer (more than 0,5 sec), then the FM

pre-selected

transmitters 9 to 16 can be

used.

The

length of time the

button

is pressed has no

influence when calling up or programming MW

and

LW transmitters.

button

For

reducing tuning frequency.

button

For

increasing tuning frequency.

'SCAN

LEVEL'

key (tuning sensitivity)

Key

light

up and tuning takes place at normal tuning

sensitivity.

Key

scan

level is lowered resulting in higher tuning

sensitivity.

This

position thus facilitates tuning in

of relatively weak stations during scanning op-

eration.

'FM-NR'

Normally this key may not be depressed.

Only depress this key if upon reception of weak

stereo transmitters annoying noise is audi-

ble.

In spite of the reduction of the noise the

stereo

effect during playback is

preserved.

The

tact that this key is depressed is made visible by

lighting

up of indicator @.

AUTO

STEREO'

button

Button not

pressed:

tuner plays back in stereo (if it is a stereo

broadcast).

tuner plays back in mono, the FM muting is

switched

off, making it possible to tune to weak

transmitters. The tuner no longer stops

automatically when tuning (see 'Manual tu-

ning').

'TUNED'

indicator

This

lights up as soon as a sufficiently powerful

transmitter has been tuned in accurately. The

indicator may fail to

light

up with weaker

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips FT565 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info