Bedienungsanleitung Philips-Saeco HD8919 Incanto (Seite 19 von 88) (Deutsch, Englisch, Italienisch)

598011

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

7.3 Containers cleaning

7.3.1 Cleaning of the water tank

> Removethewaterlterfromthetankandwashitwithfreshwater.

Restorethewaterltertoitsseat,pressinglightlyandwithaslightrotation.

Fill the water tank with fresh water.

7.3.2 Monthly cleaning of the coffee compartments

> Once a month, empty and clean the coffee bean hopper with a wet cloth.

Fill it again with the coffee beans.

7.4 Milk carafe cleaning

7.4.1 Quick milk carafe ducts rinse cycle

After one or more milk-based products have been prepared, the machine allows for a

quick cleaning of the carafe ducts. The CLEAN symbol is displayed.

If you decide to start the cycle, perform the next phase. The machine automatically

exits the function if no button is pressed for 10 seconds.

Ducts rinse cycle phase

> When the CLEAN symbol is displayed, press OK button.

Pull out the milk carafe dispensing spout as detailed in the “6.2 Milk carafe” chapter,

“Start up phase”.

Place a container under the dispensing spout.

Press the OK button to start dispensing hot water.

Burning hazard! At the beginning of each product brewing, milk or steam sprays might

be present. Wait until the end of the cycle before removing the milk carafe.

Remove and empty the container with dispensed water.

7.4.2 Daily cleaning of the milk carafe

It is important to clean the milk carafe every day, in order to promote hygiene and

guarantee the perfect thickness of the frothed milk.

At least once a day, perform the “7.4.1 Quick milk carafe ducts rinse cycle” chapter.

Disassemble the top of the carafe as shown in the “6.2 Milk carafe” chapter,

“Disassembly phase”.

Remove the milk carafe lid.

Lift the milk frother dispensing spout (1) to extract it from the top of the carafe.

Remove the suction tube (2) from the dispensing spout (1).

Clean the suction tube (2) thoroughly with lukewarm water.

7.4.3 Weekly cleaning of the milk carafe components

> Disassemble the top of the carafe as shown in the “6.2 Milk carafe” chapter,

“Disassembly phase”.

Remove the milk carafe lid.

Lift the milk frother dispensing spout to extract it from the top of the carafe.

The dispensing spout must be closed.

Milk frother dispensing spout disassembly phase

Themilkfrotherdispensingspoutcomprisesvepartsthatmustbedisassembled:

1. Dispensing spout lid

2. Suction tube

3. Rubber support

4. Milk frother

5. Milk frother connection

To disengage the dispensing spout lid (1):

• Turn the lid (1) from top to bottom

• Holdthelid(1)rmlyinonehand.

CLEAN

MAX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco HD8919 Incanto Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Saeco HD8919 Incanto

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info