Bedienungsanleitung Philips-Saeco HD8919 Incanto (Seite 20 von 88) (Deutsch, Englisch, Italienisch)

598011

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

• Place the thumb of the other hand on the release button.

• Press the thumb outward.

Remove the suction tube (2) from the rubber support (3).

Disassemble the milk frother (4) from the rubber support (3).

> Extract the milk frother connection (5) pulling it outwards.

> Clean all the components thoroughly with lukewarm water.

All the individual components, except the milk container, can be washed in the

dishwasher.

Reassembly phase

Perform the sequence of operations described in the previous “Milk frother dispensing spout

disassembly phase” in reverse order and reassemble all the components of the carafe.

Before assembling the dispensing spout, move the pin inside the carafe lid manually

to the correct position.

If you cannot assemble the dispensing spout on top of the carafe, it means that the

pin is in the wrong position.

7.4.4 Monthly cleaning of the milk carafe (three cleaning cycles)

Monthly cleaning of the milk carafe comprises three cleaning cycles carried out in a

sequence:therstcyclerequirestheuseofaspecicdetergentandwater,thesecond

and third cycles use water alone (simple rinsing).

Perform the sequence of operations described in the “7.4.5 Milk carafe cleaning

cycle” chapterthreetimesinarow,addingthespecicdetergenttothewaterthe

rsttimeandusingwateralonethesecondandthirdtime(twoconsecutiverinsing

phases). Finally, proceed as described in the “7.4.3 Weekly cleaning of the milk carafe

components” chapter.

7.4.5 Milk carafe cleaning cycle

The cleaning of the milk carafe entails a cleaning cycle with water alone (simple rinsing).

Disassemble the top of the carafe as shown in the “6.2 Milk carafe” chapter,

“Disassembly phase”.

Rinse all the components with lukewarm water. Remove all milk residue.

Reassemble the milk carafe top.

RemovethelidandllthecarafewithfreshwatertotheMAXlevel.

DuringtherstcleaningcycleaddtheSaecomilkcircuitcleanerandwaitforitto

dissolve completely.

Place the lid back on the milk carafe.

Insert the carafe in the machine as shown in the “6.2 Milk carafe” chapter, “Inserting

phase”.

Start the milk carafe dispensing spout as detailed in the “6.2 Milk carafe” chapter, “Start

up phase”.

Place a large container (1.5 l) under the dispensing spout.

Do not drink the solution resulting from the process.

Dispensing phase

> Perform the sequence of operations described in the “6.3.1 Brewing a milk-based

product”, “One frothed milk” chapter.

Burning hazard! At the beginning of each product brewing, milk or steam sprays might

be present. Wait until the end of the cycle before removing the milk carafe.

MAX

MIN

MAX

MIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco HD8919 Incanto Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Saeco HD8919 Incanto

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info