Bedienungsanleitung Philips-Saeco HD8919 Incanto (Seite 21 von 88) (Deutsch, Englisch, Italienisch)

598011

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

Repeat the “Dispensing phase” until the carafe is completely empty.

Remove the carafe as shown in the “6.2 Milk carafe” chapter, “Removing phase”.

7.5 Descaling cycle

When the CALC CLEAN symbol is displayed, it is necessary to descale the machine.

If this is not done, the machine may stop working correctly: in this case, repairs are

NOT covered by the warranty.

The descaling cycle has a duration of roughly 30 minutes. It consists of a proper

cleaning cycle, with the Saeco descaling product, followed by a rinse cycle.

Do not remove the brew group during the descaling process.

Do not drink the descaling solution or the products resulting from the descaling cycle.

Use exclusively the Saeco descaling solution. The use of other products may damage

the machine and leave residue in the water. The Saeco descaling solution is sold

separately. For further details please refer to the “10.1 Maintenance products” chapter.

Preparation phase

> Press the side buttons.

Remove the drip tray.

Remove the coffee grounds drawer and empty it.

Empty and wash the drip tray.

Restore all the components.

Fill the milk carafe following the instructions of the “6.2 Milk carafe” chapter until “Start

up phase” isdone,takingintoaccountthatthecarafeshouldbelledwithwater,not

milk, to the MIN level.

Place a large container (1.5 l) under the dispensing spout.

Descaling phase

IftheAquaCleanwaterlterispresent,extractthelterfromthewatertankandleave

theoriginalsmallwhitelter.

Pour all the descaling solution in the water tank.

ThenllthetankwithfreshwatertotheCALCCLEANlevel.

Put the water tank back in the machine.

> PresstheMENUbutton,conrmbypressingtheOKbuttonandscrollthemenuto

go to the descaling function.

Press the OK button to select the descaling function.

The machine displays the necessary sequence of operations: carafe insertion, milk

frother dispensing spout extraction.

> Press the OK button to launch the descaling cycle. The machine starts dispensing the

descaling solution at intervals. The bar shows the cycle progress status.

The cycle can be paused by pressing the ESC button and restarted by pressing the OK

button. This makes it possible for the user to empty the container or leave for a while.

Let the water be discharged until the tank is empty.

> Remove the water tank and rinse it.

Fill it with fresh water to the MAX level and return it to its proper place.

Remove and empty the container.

Remove the milk carafe as shown in the “6.2 Milk carafe” chapter, “Removing phase”

and empty it.

Repeat the entire sequence of operations described in the “Preparation phase” above

and proceed with the “Rinsing phase”.

START

CALC

CLEAN

FILT ER

START

CALC

CLEAN

MAX

CALC

CLEAN

CALC

CLEAN

START

CALC

CLEAN

FILT ER

START

CALC

CLEAN

CALC

CLEAN

red

displa

MAX

CALC

CLEAN

MAX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco HD8919 Incanto Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Saeco HD8919 Incanto

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info