Bedienungsanleitung Pioneer AVIC-HD3 II (Seite 160 von 193) (Englisch)

491808

160

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

No picture.

The handbrake lead is not con-

nected or applied.

Connect a handbrake lead correctly, and

apply the handbrake.

Handbrake interlock is activated. Park your vehicle in a safe place and apply

the handbrake. (Page 19)

[AV Input] setting is incorrect. Please read the following page and set the

setting correctly. (Page 134)

The audio skips. The navigation system is not firmly

secured.

Secure the navigation system firmly.

Failure hard disk drive. Consult your Pioneer dealer.

“Rear display” picture disap-

pears.

The setting for [REAR SCREEN]isin-

correct.

Please read the following page and set the

rear screen setting correctly. (Page 137)

There was a problem with the “Rear

display” or a faulty wiring connec-

tion, for example.

Check the “Rear display” and its connect ion.

When the gearstick is in [R], the

rear view camera images are dis-

played. (When [MIRROR] is selected

in [REAR SCREEN ] menu.)

Select [DVD]or[AV]in[REAR SCREEN]

menu. When you move the gearstick to a po-

sition other than [R], the screen will be re-

turned to the previous display.

[DVD-V Setup] is carried out. You can not display the video image to “Rear

display” during [DVD-V Setup] menu.

The image on the “Rear Display”

is in black and white, or not dis-

played correctly.

The Rear Display output from the

navigation system is switched be-

tween the NTSC, PAL and SECAM

system according to image. For

some images, the image format

may not match that of the “Rear Dis-

play”.

! Use a product (e.g. AVD-W7900) that has

an NTSC/PAL/SECAM auto switch function

for the “Rear Display” as well.

! Manually switch between NTSC, PAL and

SECAM for “Rear Display”.

Nothing is displayed and the

touch panel keys cannot be

used.

The setting for the rear view camera

is incorrect.

Connect a rear view camera correctly.

The gearstick was placed in [R]

when the rear view camera was not

connected.

Press AV button to return to the source dis-

play and then select the correct polarity set-

ting for [Camera Input]. (Page 133)

The back light of the LCD panel is

turned off.

Press V button to turn on the back light.

Touch panel key is not respond

or a different key is responding.

Touch panel keys deviate from the

actual positions that respond to

your touch for some reason.

Perform the touch panel calibration. (Page

171)

CD recording is not possible. A disc that cannot be recorded,

such as MP3 disc or DVD-video, is

inserted.

A disc other than a normal music CD cannot

be recorded.

CD recording doesn’t stop

though the record progress indi-

cator shows 100 %.

Music Library recording will be can-

celled after playback of the current

track is finished. (The recording

mode stops at the interval of the

tracks.)

Wait until the current track has ended or

change the source manually.

Appendix

Engb

160

Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-HD3 II Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-HD3 II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info