Si desea deshacerse de este producto, no
lo mezcle con los residuos generales de su
hogar
vigente, existe un sistema de recogida dis-
tinto para los productos electrónicos que
requieren un procedimiento adecuado de
tratamiento, recuperación y reciclado.
Las viviendas pri
de la UE, en Suiza y Noruega pueden de
tuitamente sus productos electrónicos usados en las
instalaciones de recolección previstas o bien en las
instalaciones de minoristas (si adquieren un producto
similar nuev
En el caso de los países que no se han mencionado
en el párrafo anterior
autoridades locales a fin de conocer el método de
eliminación correcto.
Al actuar siguiendo estas instrucciones, se asegurará
de que el producto de desecho se somete a los pro-
cesos de tratamiento, recuperación y reciclaje nec-
esarios, con lo que se previenen los efectos ne
potenciales para el entorno y la salud humana.
• La instalación y cableado de este producto requiere
la habilidad y experiencia de un especia-lista. Para
asegurar la seguridad, solicite un técnico especial-
ista para instalar la unidad.
• No intente calentar la superficie del objeti
la cámara o el propio objetiv
un encendedor o algo similar cuando los mismos
estén congelados. Eso puede causar un fallo de
funcionamiento.
• Este producto es una cámara de vista posterior
para verif
coche.
Una cámara de vista posterior es una cámara que
provee imágenes simétricas de la misma manera
que los espejos retrovisores o laterales.
• Se puede hacer la conexión a un tele
entrada de vídeo RCA, pero compruebe si el tel-
evisor tiene una función de cone
atrás.
• La luz directa del sol o luz fuerte (luz del sol refle-
jada de un parachoques, etc.) en la cámara puede
producir una mancha por encima y por debajo de
la ubicación donde la luz radia, pero esto no es un
fallo de funcionamiento.
• Este producto ha sido diseñado para complementar
la vista trasera del conductor
de la cámara no muestran todos los peligros y
obstáculos.
de marcha atrás para comprobar la vista.
• Este producto tiene una lente de gran angular y
por lo tanto, la vista cercana es amplia y la vista
distante es estrecha, lo que puede crear una sen-
sación falsa de la distancia.
atrás cuando vaya de marcha atrás para comprobar
la vista.
• No lav
o agua de alta presión, ya que esto puede resultar
en la entrada de agua en la cámara o caída de la
cámara.
• V
antes de conducir el coche.
¿No están flojos los tornillos?
– ¿Está firmemente fijo el soporte de la cámara?
– Si la cámara de vista posterior se afloja mien-
tras está conduciendo, esto puede causar un
accidente.
This device complies with P
Rules.
Operation is subject to the following tw
(1) This de
and (2) this device must accept an
receiv
undesired operation.
Information to User
Alteration or modifications carried out without
appropriate authorization may in
right to operate the equipment.
If you want to dispose this product, do not
mix it with general household waste. There
is a separate collection system for used elec-
tronic products in accordance with legisla-
tion that requires proper treatment, recovery
and recycling.
Priv
EU, in Switzerland and Norway may return their
used electronic products free of charge to designated
collection facilities or to a retailer (if you purchase a
similar new one).
For countries not mentioned abov
your local authorities for the correct method of dis-
posal.
By doing so you will ensure that your disposed prod-
uct undergoes the necessary treatment, reco
recycling and thus pre
on the en
W
Handling the cord on this product or cords associated
with accessories sold with the product may expose
you to chemicals listed on proposition 65 known to
the State of California and other governmental enti-
ties to cause cancer and birth defects or other repro-
ductivW.
• Installation and wiring of this product require spe-
cialist skill and experience.
please request a specialist technician to install the
unit.
• Do not attempt to heat the surface of the camera
lens or camera lens itself with a lighter and so on
when they ha
malfunction.
• This product is a rear view camera for checking
the view at the rear of a car
A rear view camera is a camera that pro
metrical images in the same way as rear and side
view mirrors.
• Connection to a TV with an RCA video input is
possible, but conf
a rev
• Direct sunlight or strong light (sunlight reflected
from a bumper etc) on the camera may result in
smear above and belo
light strikes, but this is not a malfunction.
• This product is designed to supplement the driv
s rear view
dangers and obstacles. Be sure to look behind you
when rev
• This product features a wide-angle lens, so the
near view is wide and the f
which may create a false sense of distance. Be
sure to look behind you when rev
the view
• Do not wash your car with an automatic car wash
or high-pressure water as it may result in water
entering the camera or the camera falling of
• Check camera stand installation before driving.
Are the screws loose?
– Is the camera stand firmly secured?
– If the rear view camera comes loose while you
are driving it may cause an accident.
Installation <ENGLISH>
Parts supplied
𝖠 Rear view camera × 1
𝖡 RCA power supply cable × 1
𝖢 Power supply unit × 1
𝖣 Hexagon × 1
𝖤 V× 1
𝖥 V× 1
𝖦 Clamp × 10
𝖧 W× 1
𝖨 Double-sided × 1
𝖩 Camera stand bracket 𝖢 × 1
Installation example (Fig. 1)
① Glass
② Make sure it doesn’t touch the wiper
③ Install on the center part
Changing the orientation of camera
stand installation (Fig. 11-1)
The camera stand can be installed in
various w
which camera stand bracket 𝖡 is attached
or attaching camera stand bracket 𝖢 .
Change to match your car’
installation site.
1. Use the hexagon wrench to r
the screws securing camera stand
brackets 𝖠 and 𝖡 . (Fig. 2)
2. Change the direction of installation
bracket 𝖡 . (Fig. 3-1)
3. Reattach with the screws.
Installing Using Camera Stand Bracket 𝖢
(Fig. 11-4)
1. Use the hexagon wrench to r
the screws securing camera stand
brackets 𝖠 and 𝖡 . (Fig. 2)
2. Attach camera stand bracket 𝖢 to
the camera stand. (Fig. 3-2)
3. Attach the rear view camera to cam-
era stand bracket 𝖡 . (Fig
4. Attach the camera stand and rear
view camera. (Fig. 3-4)
Route the cables as shown in the f
that they do not become entangled.
Attach the camera stand while being care-
ful not to mistake the vertical orientation
of the rear view camera. (Fig. 7)
Installation Procedure
Note:
• Before making a final installation of the unit,
temporarily connect the wiring to confirm that
the connections are correct and the system works
properly
• Use only the parts included with the unit to ensure
proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.
• Install the unit where it does not get in the driv
s way and cannot injure the passenger if there is a
sudden stop, like an emergenc
• When mounting this unit, make sure none of the
leads are trapped between this unit and the sur-
rounding metalwork or f
• T
supply unit in places where it might come in con-
tact with liquids.
• Do not mount this unit near the heater outlet,
where it would be af
doors, where rainwater might splash onto it. (Ne
install in locations such as the above because of
the danger of malfunction due to high tempera-
tures.)
• Before drilling any mounting holes alw
behind where you want to drill the holes. Do not
drill into the gas line, brake line, electrical wiring
or other important parts.
• If this unit is installed in the passenger compartment,
anchor it securely so it does not break free while the
car is moving, and cause injury or an accident.
• If this unit is installed under a front seat, make
sure it does not obstruct seat movement. Route
all leads and cords carefully around the sliding
mechanism so they do not get caught or pinched
in the mechanism and cause a short circuit.
• Locate in the position you want to install the rear
view camera.
camera, and install so that the camera doesn’t
touch the car
• When sticking to a glass surface, stick it on in a
position that assures the camera doesn’t touch the
rear window
• Install so that it does not obstruct the rear field of
view
• Install so that it does not protrude from the side of
the car
• Do not perform installation in rain or fog.
• When humidity is high, dry the surface to which
the unit is to be attached before installing. Moisture
on the attachment surface reduces adhesi
strength which may lead to the unit coming off.
IMPOR
SAFEGU
PRECA
SEGURID
• If the temperature of the attachment surface is
low
installing to improve adhesi
• Do not attach the camera stand to areas on the car
body treated with fluorocarbon resin, or glass. This
may result in the rear view camera f
• During the 24-hour period after installing:
– Do not apply water to the unit.
– Do not expose the unit to rain.
– Do not subject the camera to unnecessary force.
• Thoroughly clean where tape is used for sticking
on the unit.
1. Clean the surface to which the rear
view camera is to be installed.
(Fig. 4)
Use a cloth or other item to wipe oil, wax,
dust and any other dirt from the installation
surface.
2. Remove the r
the camera stand. (Fig. 5)
Remov
hexagon wrench pro
① To
② Rear view camera
③ Bottom
④ Installation
⑤ Camera
3. Align the camera stand with the
installation surface. (Fig. 6)
Adjust the camera stand so that there is no
space between it and the installation surface.
① T
② T
③ Camera
4. Attach the camera stand remo
step 2 to the rear view camera with
the mounting screws. (Fig
The rear view camera has a mark indicat-
ing the top of the camera.
Attach the camera stand while being care-
ful not to mistake the vertical orientation
of the rear view camera.
① To
② Bottom
③ Mark
5. Peel off the sheet on the back of they
camera stand and stick it on. (Fig. 8,
Fig. 9)
Press the camera stand with your fingers to
stick it to the installation surface.
the adhesiv
on a second time reduces adhesiv
which may result in the unit coming off.
① Camera
② When sticking to the center
③ When attaching using camera stand bracket
𝖢 (attaching while rotating by 90°)
6. Adjust the angle so that the bumper
or rear edge of the car is display
at the bottom of the
(Fig. 10, Fig
① Angle of view
Horizontal:
② Angle of view
V
③ Bumper or rear edge of car
7. Attach the power supply unit.
(Fig. 13)
Aff
bottom of the power supply unit, and af
the
location.
① Power supply unit
② V
③ V
• Y
directly to a carpet, but do not use the soft type.
• Install the power supply unit close enough
for the rear view camera cable to reach.
