Bedienungsanleitung Pioneer VSX-AX3-S (Seite 97 von 104) (Englisch)

455258

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Techno Tidbits and Problem-solving

EXPERT

The setup screen doesn’t

appear.

• The output jacks haven’t been con-

nected properly.

• The TV hasn’t been connected to the

MONITOR OUT jack.

• The PAL/NTSC setting is incorrect.

• Some TVs connected to the receiver with

component video cords do not display

the Setup Screen when color burst is on.

(In the NTSC format only)

• Check all connections (see pages 16,

17, 20 and 22).

• Connect the TV to the MONITOR OUT

jacks (see page 16).

• Select the correct PAL/NTSC setting

(see page 8).

• Turn the color burst to off. (From the

Standby mode, and while holding

down the MULTI JOG CONTROL

RETURN button press the STANDBY/

ON button. Each action switches the

color burst on or off.)

Every time AUTO SURROUND

SETUP is attempted, there is

some kind of error, or the

settings seem incorrect.

• The room environment is not optimal for

auto setup (too much ambient noise;

obstacles blocking the speakers from

the microphone; the monitor noise is

interfering with the setup; etc.).

• Make sure the room environment is in

line with the guidelines for auto setup

in this manual (see page 13 and Memo

on page 15).

The LARGE and SMALL

settings for speakers after the

Auto Surround Sound Setup

are incorrect.

• There are other frequencies in the room

that are affecting the auto setup.

• Check for household appliances (air

conditioner, fan, etc.) that may be

affecting the environment and switch

them off if necessary.

After the proper settings have

been made, there still seems

to be something wrong with

the sound.

• The speakers have been incorrectly con-

nected (left and right connections are

reversed).

• Check all connections. Be sure match

the right channel on the speaker with

the right channel on the speaker termi-

nals (see page 25).

No sound is output when a

function is selected.

• Improper connections.

•Sound is muted.

• The volume is turned down.

• Speakers are turned off.

• DIGITAL/ANALOG setting is incorrect.

• MULTI CH IN mode is on.

• Make sure the component/speakers

are connected correctly (see pages 16,

17, 20, 22, 24 and 25).

• Press MUTING on the remote control.

• Adjust MASTER VOLUME.

• Press SPEAKERS (A/B) to select the

speakers you connected (see page 72).

• Select the proper signal with the SIG-

NAL SELECT button (see page 44).

• Turn MULTI CH IN mode off (see

page 52).

No sound output from the

front speakers.

• The front speakers aren’t connected

properly.

• Check all connections (see page 25).

No sound output from

surround or center speakers.

• Speaker settings are incorrect.

• The surround or center speakers aren’t

connected properly.

• The listening mode is STEREO.

• See SPEAKER SETTING on page 39 to

check the speaker settings.

• Check all connections (see page 25).

• Choose a surround listening mode

(see page 43).

Cause

Remedy

No audio

Setup

Symptom

00_VSX-AX3.book Page 97 Monday, May 19, 2003 1:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-AX3-S Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-AX3-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info