Bedienungsanleitung Pioneer VSX-AX3-S (Seite 99 von 104) (Englisch)

455258

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Techno Tidbits and Problem-solving

EXPERT

Subwoofer output is very low. • Settings route signal away from sub-

woofer.

• To get more signal to the subwoofer

set it to PLUS or choose SMALL for the

front speakers (see page 39).

During multi channel

playback, there is no sound

output from one speaker.

• That speaker is set to NO. • Set the speaker to YES.

A multi channel DVD source

appears to be downmixed

from 2 channels during

playback.

• The source is coming from something

other than the MULTI CH IN jacks (for

example, digital PCM output, etc.)

• Check the MULTI CH IN connection

(see page 21) and select the type of

playback with the MULTI CH IN button

(see page 52).

Considerable noise in radio

broadcasts.

• Incorrect frequency.

• The antenna is not connected.

• Digital cables are near the antenna ter-

minals and wires.

• Tune in the correct frequency.

• Connect the antenna (see page 24).

• Route digital cables away from the

antenna terminals and wires.

Broadcast stations cannot be

selected automatically.

• The antenna is poorly positioned.

• Interference caused by other equipment

(fluorescent lamp, motor, etc.).

• Weak radio signals.

• Adjust the direction and position for

best reception.

• Turn off the equipment causing the

noise or move it away from the

receiver.

• Place the antenna farther away from

the equipment causing the noise.

• Connect an outdoor AM or FM

antenna (see page 24).

Noise or hum can be heard

even when there is no sound

being input.

• There is electrical interference from

another component or appliance.

• Check that personal computers or

other digital components connected to

the same power source are not caus-

ing interference.

When a search is performed

by a DTS compatible CD player

during playback, noise is

output.

• The search function performed by the

player interferes with the reading of digi-

tal information.

• This is not a malfunction, but be sure

to turn the volume down to prevent the

output of loud noise from your speak-

ers.

When playing a DTS format LD

there is noise audible on the

soundtrack.

• The SIGNAL SELECT is on ANALOG. • Set the SIGNAL SELECT to DIGITAL

(see page 44).

Audio doesn’t record (in some

cases, even if video does).

• You are trying to make an analog record-

ing from a digital signal, or a digital

recording of an analog source.

• The digital source is copy protected.

• The jacks for recording have not been

connected properly.

• You can only record analog to analog,

or digital to digital. Make sure the play-

back and recording components are

hooked up with the same kind of con-

nections.

• You can’t record digital sources that

have been copy protected.

• Check connections (see pages 20 and

22).

Cause

Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-AX3-S Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-AX3-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info