Bedienungsanleitung Pioneer VSX-AX3-S (Seite 98 von 104) (Englisch)

455258

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Techno Tidbits and Problem-solving

No sound output from the

subwoofer.

• The subwoofer setting is NO.

• The subwoofer output setting is too low.

• The bass peak level setting is too low.

• There is very little low frequency informa-

tion in your source.

• The crossover frequency is set too low.

• There is a problem with the subwoofer.

• The subwoofer isn’t connected properly.

• Change the setting to YES or PLUS

(see page 39).

• Adjust the output setting to the level

you want (see pages 41 and 85).

• Adjust the bass peak level setting to

the level you want (see page 92).

• Change your subwoofer setting to one

of the following (see page 39):

• Front: SMALL Subwoofer:YES

• Front:LARGE Subwoofer:PLUS

• Raise the frequency level to match

your speakers’ characteristics (see

page 84).

• Check the three following points:

•Check the power.

• Check the subwoofer volume

control.

• Check the subwoofer hasn’t

automatically switched to standby

mode (check the subwoofer

manual).

• Check all connections (see page 25).

No sound output from the

surround back speakers.

• The SB CH MODE is set to OFF.

• The source is not a 6.1 channel playback

source.

• The surround back speakers aren’t con-

nected properly.

• The surround back channel is set to 1

speaker setting only, and the speaker is

connected to the right channel output.

• Set the SB CH MODE to ON or AUTO

(see page 53).

• Set the SB CH MODE to ON or AUTO

(see page 53) and choose one of the

SURROUND listening modes (see

pages 46 and 47).

• Check all connections (see page 25).

• Connect the speaker to the surround

back left channel output (see page 25).

No sound output from one

(set of) speaker(s).

• The speaker system setting is NO.

• The speaker isn’t connected properly.

• The source has no sound output for that

channel.

• The speaker output level is set too small.

• Change the speaker setting to YES

(see page 39).

• Check all connections (see page 25).

• If you choose one of the SURROUND

listening modes, a channel may be

created for the speaker (see page 43).

• Increase the speaker output level.

Sound is produced from some

components, but not from

digital components.

• SIGNAL SELECT is set incorrectly.

• The digital inputs are assigned incor-

rectly, or not at all.

• The digital components aren’t con-

nected properly.

• The player is not compatible with the

source you’re using, or the player set-

tings are incorrect.

• The MULTI CH IN mode has been

selected.

• The digital output level has been turned

down on a CD player or other compo-

nent equipped with digital output level

adjustment capability.

• Set SIGNAL SELECT to AUTO or

according to the type of connections

made (see page 44).

• Set the digital input settings correctly

(see pages 12, 23, and especially 81).

• Check all connections.

• Choose a compatible source, or check

the player’s manual for the correct set-

tings.

• Choose one of the listening modes

(see page 45). The MULTI CH IN

switches off automatically.

• Set the digital volume level of the

player to full, or to the neutral position.

Cause

Remedy

Symptom

00_VSX-AX3.book Page 98 Monday, May 19, 2003 1:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-AX3-S Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-AX3-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info