Bedienungsanleitung Pioneer VSX-C100 (Seite 28 von 60) (Englisch)

455260

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Fine Tuning Your Surround Sound

Front speakers

setting

This settings establishes the size and configuration of the

front

speakers you have connected more exactly than the

automatic setup. Select either Large (L) or Small (S). This

will determine if bass sounds are sent by the receiver to the

speakers being set.

Large: If the cone size (diameter) of your speaker(s) is

larger than 12 centimeters, set to Large.

Small: If the cone size (diameter) of your speaker(s) is 12

centimeters or smaller, set to Small.

Follow steps 1&2 on page 27 (if necessary).

Use the +/– buttons to choose a speaker

setting according to the speakers you hooked

up.

Press SETUP to advance to the next receiver setting mode.

Press ENTER if you want to exit the setting

mode.

Center speaker

setting

This settings establishes the size and configuration of the

center speaker you have connected more exactly than the

automatic setup. Select either Large (L) or Small (S).

This will determine if bass sounds are sent by the

receiver to the speaker being set. If no speakers are

connected choose “–”.

Large: If the cone size (diameter) of your speaker(s) is

larger than 12 centimeters, set to Large.

Small: If the cone size (diameter) of your speaker(s) is 12

centimeters or smaller, set to Small.

None (–): Choose this setting if you have no speaker(s)

hooked up to this terminal. Sound coming from this

channel in the original source will be down-mixed to one

of the active speakers.

Follow steps 1&2 on page 27 (if necessary).

Use the +/– buttons to choose a speaker

setting according to the speakers you hooked

up.

Press SETUP to advance to the next receiver setting mode.

Press ENTER if you want to exit the setting

mode.

• If the front speakers are set to Small (S) you can’t

choose Large (L) for the center speaker.

• If the center and surround speakers are set to None (–)

the listening modes for all the inputs will automatically

go into AUTO mode.

Surround speakers setting

This settings establishes the size and configuration of the

surround speaker you have connected more exactly than

the automatic setup. Select either Large (L) or Small (S).

This will determine if bass sounds are sent by the receiver

to the speaker being set. If no speakers are connected

choose “–”.

Large: If the cone size (diameter) of your speaker(s) is

larger than 12 centimeters, set to Large.

Small: If the cone size (diameter) of your speaker(s) is 12

centimeters or smaller, set to Small.

None (–): Choose this setting if you have no speaker(s)

hooked up to this terminal. Sound coming from this

channel in the original source will be down-mixed to one

of the active speakers.

Follow steps 1&2 on page 27 (if necessary).

Use the +/– buttons to choose a speaker

setting according to the speakers you hooked

up.

Press SETUP to advance to the next receiver setting mode.

Press ENTER if you want to exit the setting

mode.

• If the front speakers are set to Small (S) you can’t

choose Large (L) for the surround speakers.

• If the center and surround speakers are set to None (–)

the listening modes for all the inputs will automatically

go into AUTO mode.

Subwoofer setting

The Subwoofer setting divides the high and low sounds

(frequencies) between the speakers. Since most smaller

speakers can’t handle deep bass tones, this setting allows

you to send those sounds to the subwoofer instead of the

speakers set to Small (S) in your system. Choose the point

at which you want the frequency routed to the subwoofer.

We recommend setting this to 200 Hz if smaller book-

shelf-type speakers are used for your “Small” speakers.

Also, when a subwoofer is used, you have the option of

selecting the PLS setting, which adds extra bass.

Follow steps 1&2 on page 27 (if necessary).

Use the +/– buttons to choose subwoofer

setting 100 Hz, 150 Hz, 200 Hz, PLS (plus)

or – – – (off).

SUBWF 200 Hz

Sends bass frequencies below 200 Hz to the

subwoofer.

SUBWF 150 Hz

Sends bass frequencies below 150 Hz to the

subwoofer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer VSX-C100 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer VSX-C100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info