Bedienungsanleitung Pioneer XDJ-AERO (Seite 23 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Basic Operation

Using this unit’s rotary selector to load

tracks from a mobile device or computer

via wireless LAN

1 Connect the mobile device or computer to this unit

via wireless LAN.

2 Launch rekordbox on the mobile device or computer

and establish the link.

For rekordbox (Mac/Windows) on the computer, click at the bot-

tom left of the screen.

The XDJ-AERO icon is displayed on the screen and tracks can be loaded

from rekordbox (Mac/Windows) to this unit.

3 Press this unit’s [ rekordbox] button.

The mobile devices or computers connected to this unit are displayed on

the main unit display.

4 Turn this unit’s rotary selector to select the mobile

device or computer, then press the rotary selector.

Use this unit’s rotary selector to select the mobile device or computer to

be operated.

5 Turn this unit’s rotary selector to select the track from

the track collection in rekordbox on the mobile device or

computer.

! To move to lower layers in a folder, select the folder then press the

rotary selector.

! To return to a higher level, press the [BACK (TOP)] button.

! When the [BACK (TOP)] button is pressed for over 1 second, the

screen returns to the topmost layer (only when using a mobile

device).

6 Press this unit’s rotary selector.

Track loading starts. The jog dial indicator on the deck on which the

track is being loaded flashes.

Once playback is possible, the jog dial indicator stops flashing, remain-

ing lit, the track name is displayed on the main unit display and playback

starts (by factory default).

Loading tracks from USB devices

1 Connect the USB device to the USB device insertion slot.

2 Press the [

USB] button.

The tracks on the USB device are displayed on the main unit display.

3 Turn the rotary selector.

Select the track.

! To move to lower layers in a folder, select the folder then press the

rotary selector.

! To return to a higher level, press the [BACK (TOP)] button.

! When the [BACK (TOP)] button is pressed for over 1 second, the

screen moves back to the layer above.

4 Press the rotary selector.

The track is loaded and playback begins.

When recorded on a USB device, some time may be required for loading

the track, depending on the USB device.

 Disconnecting USB devices

Always perform the following procedure to disconnect USB devices.

Pulling the USB device out without performing this procedure could

make the USB device unreadable.

When turning this unit’s power off, be sure to remove the USB device

first.

1 Press the [USB STOP] button for over 2 seconds.

The USB indicator turns off.

2 Disconnect the USB device.

Outputting sound

Before outputting sound, check that this unit and the surrounding

devices are properly connected. For instructions on connecting, see

Connecting the input/output terminals on page 10 or Connecting by wire-

less LAN on page 11.

Set the volume of the power amplifiers connected to the [MASTER OUT

1] and [MASTER OUT 2] terminals to an appropriate level. Note that very

loud sounds will be output if the volume is set too high.

When playing tracks via wireless LAN, playback may become impos-

sible due to deterioration of the communication conditions. In this

case, loop playback begins automatically and [EMERGENCY LOOP] is

displayed on the main unit display.

When communications conditions recover, the [EMERGENCY LOOP]

display turns off. Press the [AUTO BEAT LOOP] control at this time to

cancel looping.

To output the sound of channel 1 [CH 1]

To output the sound of [CH 2] (channel 2), replace [CH 1] with [CH 2],

[DECK1] with [DECK2] and [PHONO1/LINE1] with [PHONO2/LINE2] in

the procedure below.

1 Switch the [DECK1, PHONO1/LINE1] selector switch in

the [CH 1] section.

Select the input source for [CH 1] from among the devices connected to

this unit.

— [DECK1]: Selects the USB device or the unit connected by wire-

less LAN.

— [PHONO1/LINE1]: Selects the device connected to the

[PHONO1/LINE1] terminals.

2 Press the [MASTER] button at the center of this unit.

Set so that the [MASTER] button is off.

! When the [MASTER] button is off, the audio level input to [CH 1] and

[CH 2] is displayed on the [LEVEL] indicator.

3 Turn the [CH 1] [TRIM] control clockwise.

Adjusts the audio level input to the [CH 1] terminal.

The [LEVEL] indicator lights when sound is properly being input to

[CH 1].

Adjust the [TRIM] control so that the orange indicator lights where the

track’s volume is highest (at the climax, etc.)

Be careful that the red indicator does not light, or the sound could be

distorted.

4 Move the [CH 1] channel fader to the back side.

The level of the sound output from the [CH 1] terminals is adjusted.

5 Switch [CROSS F. CURVE THRU, , ] (the crossfader

curve selector switch).

This switches the crossfader curve characteristics.

— [THRU]: Choose this when you do not want to use the crossfader.

— [ ]: Set here for a curve that rises gradually.

— [ ]: Set here for a curve that rises steeply. (When the crossfader

moves away from either the left or right edge, the sound is imme-

diately output from the opposite side.)

6 Set the crossfader.

Switch the channel whose sound is output from the speakers.

— Left edge: The [CH 1] sound is output.

— Center position: The sound of [CH 1] and [CH 2] is mixed and

output.

— Right edge: The [CH 2] sound is output.

! This operation is not necessary when the [CROSS F. CURVE (THRU,

, )] selector switch is set to [THRU].

7 Press the [MASTER] button at the center of this unit.

Set so that the [MASTER] button is lit.

! When the [MASTER] button is lit, the audio level output from the

[MASTER OUT 1] and [MASTER OUT 2] terminals is displayed on

the [LEVEL] indicator.

Pioneer XDJ-AERO Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info