Bedienungsanleitung Pioneer XDJ-AERO (Seite 24 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

8 Turn the [MASTER LEVEL] control clockwise.

Sound is output from the speakers.

The [LEVEL] indicator lights.

Adjust the [MASTER LEVEL] control so that the orange indicator lights

where the track’s volume is highest (at the climax, etc.).

Be careful that the red indicator does not light, or the sound could be

distorted.

Mixing using the faders

Prepare the unit in advance so that the sound of [CH 1] is being output

from the speakers. For instructions on preparation, see Outputting

sound on page 23.

For instructions on monitoring the sound, see Monitoring sound with

headphones on page 20.

Mixing using the channel faders

1 Set [CROSS F. CURVE THRU, , ] (the crossfader

curve selection switch) to [THRU].

2 Switch the [DECK2, PHONO2/LINE2] selector switch in

the [CH 2] section.

3 Turn the [CH 2] [TRIM] control clockwise.

4 Press the [

(CH2)] button.

The sound of [CH 2] is monitored from the headphones.

5 Turn the [HEADPHONES MIXING] control.

This adjusts the balance of the monitor volume between the sound

output from the [MASTER OUT 1] and [MASTER OUT 2] terminals (the

sound of [CH 1]) and the sound of [CH 2].

6 Operate [DECK2].

While checking the sound over the headphones, adjust the tempo of

[CH 2] track to match the tempo of [CH 1] track.

7 While moving the [CH 2] channel fader to the back,

move the [CH 1] channel fader to the front.

While checking the sound output from the speakers, operate the chan-

nel faders to substitute the sound of [CH 1] with the sound of [CH 2].

Mixing is completed once only the [CH 2] sound is being output from the

speakers.

Mixing using the crossfader

1 Set [CROSS F. CURVE THRU, , ] (the crossfader

curve selector switch) to [ ] or [ ].

2 Operate [CH 2].

Operate as described in steps 2 to 6 under Mixing using the channel

faders on page 24.

3 Move the crossfader gradually to the right.

While checking the sound output from the speakers, operate the cross-

fader to substitute the sound of [CH 1] with the sound of [CH 2].

Mixing is completed once only the [CH 2] sound is being output from the

speakers.

Disconnecting links

Links with mobile devices can be disconnected.

! For instructions on disconnecting links with computers, see the

Operating Instructions for rekordbox (Mac/Windows).

1 Press the [INFO(UTILITY)] button for over 1 second.

The [UTILITY] screen is displayed.

2 Turn the rotary selector to select [LINK DISCONNECT],

then press the rotary selector.

A list of the mobile devices on which rekordbox (iOS/Android) is installed

and with which links with this unit are established is displayed on the

main unit display.

3 Turn the rotary selector to select the mobile device

whose link you want to disconnect, then press the rotary

selector.

The link with the selected mobile device is disconnected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-AERO Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info