Bedienungsanleitung Polti Vaporetto Lecoaspira FAV30 (Seite 12 von 22) (Englisch)

648710

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

CORRECT USE OF THE PRODUCT

This appliance is intended for internal home use as a steam

cleaner and as a vacuum with water filter for liquids, and dry

and/or damp material (dirt) from surfaces in accordance with

the instructions provided in this manual. Please read these

instructions carefully and keep them. If this manual is lost, it can

be consulted and/or downloaded from the website

www.polti.com.

Only vacuum domestic dirt and/or water.

Do not use on debris or chalk, cement or residues from building

sites or brick laying.

Do not use on earth and sand/soil, etc.

Do not use on ash, soot and combustion residues (fireplaces,

barbecues, etc.).

Do not use on printer, photocopier or fax toner and ink powder.

Do not vacuum pointed, sharp or stiff objects.

The appliance only functions correctly if the dirt collector is

inserted and complete with all its parts.

Do not lift the product by the dirt collector handle.

Never leave the appliance exposed to weathering.

Correct use of the product is only as detailed in this instruction

manual. Any other use may damage the appliance and

invalidate the warranty.

INFORMATION FOR USERS

Pursuant to European Directive 2012/19/EU, regarding elec-

tric and electronic appliances, this appliance must not be di-

sposed of with domestic waste, but sent to an official collec-

tion facility. This appliance complies with EU Directive

2011/65/EU

The crossed-out bin symbol on the appliance indica-

tes that, at the end of its useful lifespan, the product

must be disposed of separately from other waste.

Therefore, at the end of its life, the user must hando-

ver the appliance to an appropriate collection centre for elec-

tric and electronic waste. Proper separate waste collection to

facilitate the subsequent recycling, treatment and environ-

mentally compatible disposal of the appliance helps to pre-

vent negative effects on the environment and human health,

and promotes recycling of the materials the product is made

of. Unlawful disposal by the owner involves the application of

the administrative sanctions envisaged by current legislation.

Polti S.p.A. reserves the right to change equipment or acces-

sory specification without prior notice.

Before leaving our factory all our products are rigorously te-

sted. This is the reason why your Vaporetto Lecoaspira may

contain some residual water in the boiler and in the tank.

WHICH WATER TO USE IN THE BOILER

This appliance has been designed to function with normal

medium tap water between 8°F and 20°F. If the tap water

contains a lot of limescale use a mix composed of 50% tap

water and 50% demineralised water which is widely available

to purchase. Do not use pure demineralised water.

Warning: check the hardness of the water at the technical office

at your local council or the local water supplier.

If you only use tap water, you can reduce the formation of

limescale by using the special Kalstop FP2003 decalcifying

product, distributed by Polti, and available for sale at all major

domestic-appliance stores or online at www.polti.com.

Never use distilled water, rain water or water containing

additives (e.g. starch, perfumes), or water produced by other

domestic appliances, by water softeners or filter jugs.

Do not use chemical substances or detergents.

1. PREPARING FOR USE (chart page 4)

1.1 Lift the handle of the water filter collector and remove the

collector from its housing.

1.2 Turn the handle of the water filter collector and remove the

water filter unit.

1.3 Fill the water filter collector with about 1.2 l of tap water up

to the MAX indicator.

1.4 Replace the filter unit in the water filter collector returning

it to its original position.

1.5 Reposition the water filter collector in its housing and turn

the handle until it returns to its starting position.

1.6 Unscrew the safety cap and fill the boiler with 1.1l of water (if

completely empty). Avoid overflowing and do not fill above the

recommended limit.

Carefully screw the safety cap back on, checking that it is fully

tightened.

This operation must always be carried out when the boiler has

cooled and with the power cable disconnected from the mains.

1.7 Open the door of the built-in socket and insert the built-in

plug of the flexible steam/vacuum hose.

1.8 Completely unwind the power cable and connect it to an

Avoid water leaks. Make sure that the water does not overflow,

to avoid wetting the surface on which your Vaporetto

Lecoaspira is resting.

WARNING: Incorrectly inserting the water filter collector can

cause a reduction in the suction capacity.

Add Bioecologico to the water in the water-filter collector. This

anti-foam and deodorising liquid containing natural substances

releases a pleasant perfume into the room, prevents the

formation of foam in the water filter, and guarantees the correct

operation of the appliance (Chapter 14).

There could be accessories in the water filter collector,

therefore remove them before using the appliance.

Use tap water in the water filter collector.

| 28|

ENGLISH

PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10.45 Pagina 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira FAV30 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira FAV30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info