Bedienungsanleitung Polti Vaporetto Lecoaspira FAV30 (Seite 13 von 22) (Englisch)

648710

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

appropriate mains socket. Always use the product with the

cable completely unwound.

1.9 The appliance is ready for use.

2. CONNECTION OF ACCESSORIES (see page 4)

All the Vaporetto Lecoaspira accessories can be connected

directly to the flexible steam/vacuum hose or to the extension

hoses.

2.1 To connect the specific accessories for the suction and

steaming features proceed as follows:

Move the locknut of the accessory, if

present, to the OPEN position and connect

the accessories.

Move the accessory locknut to the CLOSED

position. Check the strength of the

connection.

On the extension tubes there is an

additional fastening button: proceed as

described previously for the accessories

and release the tubes by sliding the button

as far as the lock position.

2.2 To connect the special accessories only for suction it is only

necessary to attach them without coupling them to the locknut.

2.3 To connect the steam lance with the steam concentrator,

simply screw it on. The same operation can be carried out for

the coloured brushes, which can in turn be screwed onto the

steam concentrator and onto the steam lance. The different

colours allow you to always use the same brush for the same

surface.

3. CLEANING HARD FLOORS

(tiles, ceramic surfaces, etc.)

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

3.1 Lock the two extension tubes (3) onto the handle (1).

3.2 For suction only, connect the universal brush (2) with the

bristle frame (2a) and press the suction button on the appliance

to proceed with the cleaning operations.

3.3 For steam cleaning and suction attach the frame for liquids

(2b) to the universal brush (2).

3.4 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 4/5. The steam

indicator light ( ) comes on, and then turns off when the correct

temperature has been reached.

3.5 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button on the appliance.

The combined use of steam and suction allows the most

efficient sanitising of the surface, dissolving dirt, eliminating

grease, germs and mites, and above all allows drying of the

surfaces.

In this position, it is also possible to vacuum small quantities of

liquids and dry the floor.

3.6 To clean using steam alone, it is possible to use the abrasive

action of the cloth supplied (10). Attach it to the universal brush

(2) (see page 5) before starting to clean the surface.

4. CLEANING DELICATE FLOORS

(wooden, stone, waxed surfaces, etc.)

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

4.1 Lock the two extension tubes (3) onto the handle (1).

4.2 For suction only, connect the universal brush (2) with the

bristle frame (2a) (see page 4) and press the suction button on

the appliance to proceed with the cleaning operations.

4.3 For steam cleaning and suction attach the rug/carpet frame

(2c) to the universal brush (2) (see page 4). Attach the cloth

supplied (10) to the universal brush (2) (see page 5).

4.4 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 1/2. The steam

indicator light ( ) comes on, and then turns off when the correct

temperature has been reached.

For safety reasons, engage the steam lock on the handle

during vacuuming.

Before using the appliance on delicate surfaces, ensure that

the part in contact with the surface is free from foreign bodies

that could cause scratches.

Before removing the cloth from the brush, wait a few minutes

to allow the cloth to cool.

For safety reasons, engage the steam lock on the handle

during vacuuming.

To avoid any dirt in the dirt collector causing bad smells, we

recommend emptying and cleaning after every use according

to the methods described in Chapter 15.

WARNING: When first operating steam, there may be some

drops of water mixed with the steam due to temperature

imbalances.

Direct the first jet of steam onto a rag.

| 29|

ENGLISH

PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10.45 Pagina 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira FAV30 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira FAV30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info