Bedienungsanleitung Polti Vaporetto Lecoaspira FAV30 (Seite 14 von 22) (Englisch)

648710

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

| 30 |

4.5 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button on the appliance. The cloth will remove

the dirt and the steam with sanitise the surface.

5. CLEANING RUGS AND CARPETS

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

5.1 Lock the two extension tubes (3) onto the handle (1).

5.2 Connect the universal brush (2) to the rug/carpet frame (2c)

(see page 4).

5.3 For suction only, press the suction button on the appliance

to proceed with cleaning.

5.4 (see page 5) For steam cleaning and suctionturn on the boiler

by pressing the boiler button and adjust the strength of the steam

using the steam adjustment dial (to turn the boiler off press the

boiler button again); for this type of surface we recommend steam

level 3. The steam indicator light ( ) comes on, and then turns

off when the correct temperature has been reached.

5.5 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button on the appliance.

5.6 It is possible to use the suction and steam features either

together or by alternating them, activating both as described in

the previous points.

Combined use of steam and suction allows the most efficient

sanitising of the surface, dissolving dirt and removing grease,

germs and mites; it allows brightens the colour of fibres and

dries surfaces more quickly.

6. CLEANING GLASS, WINDOWS AND TILES

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

6.1 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 3. The steam indicator

light ( ) comes on, and then turns off when the correct

temperature has been reached.

6.2 Connect the steam + suction nozzle (7) to the handle (1) or

to the extension tubes (3) and attach the window cleaning

accessory (7a) (see page 5).

Ensure that the steam lock on the handle is deactivated.

6.3 Press and hold the steam trigger on the handle (1) and

steam the surface abundantly to dissolve the dirt.

6.4 Activate suction and run the steam + suction nozzle (7) with

the window cleaning accessory (7a) over the surface to proceed

with the drying.

The steam + suction nozzle (7) with the window cleaning

accessory (7a) allows cleaning to be completed quickly and

simply, without marks and smears.

The combined use of steam and suction allows the most

efficient sanitising of the surface, dissolving dirt, and eliminating

grease and germs, and above all allows drying of the surface.

7. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

7.1 For suction only, connect the nozzle for frames (7) to the

handle (1) and press the suction button on the appliance to

proceed with the cleaning operations.

7.2 For steam cleaning and suction use the nozzle for frames (7)

with the cap (9) attached and connect it to the handle (1) or to the

extension tubes (3) (see page 5).

7.3 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 1/2. The steam

indicator light ( ) comes on, and then turns off when the correct

temperature has been reached.

Ensure that the steam lock on the handle is deactivated.

WARNING: Before cleaning leather or fabrics with steam,

consult the manufacturer’s instructions and always carry out a

test on a hidden part or on a sample of the material. Allow the

steamed part to dry to make sure that no changes in colour or

deformations have occurred.

WARNING: To clean glass surfaces during cold weather,

preheat the windows starting to vacuum from a distance of

about 50 cm from the surface.

WARNING: For additional safety, test steam delivery on a

hidden part, leave the steamed part to dry to ensure that no

changes in colour or deformations have occurred.

To avoid any dirt in the dirt collector causing bad smells, we

recommend emptying and cleaning after every use according

to the methods described in Chapter 15.

For safety reasons, engage the steam lock on the handle

during vacuuming.

WARNING: Before cleaning fabrics with steam, consult the

manufacturer’s instructions and always carry out a test on a

hidden part or on a sample of the material. Allow the steamed

part to dry to make sure that no changes in colour or

deformations have occurred.

Before removing the cloth from the brush, wait a few minutes

to allow the cloth to cool.

ENGLISH

PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10.45 Pagina 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira FAV30 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira FAV30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info