Bedienungsanleitung Practixx PX-RRM-600WI (Seite 34 von 68) (Deutsch, Englisch, Französisch)

782000

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

26 | GB

Total weight (net) approx. 8 kg

Technical changes reserved!

m IMPORTANT:

This charging unit is suitable exclusively for charging

the product type: PX-RRM-600Wi.

Noise & vibration

m Warning: Noise can have serious e󰀨ects on your

health. If the machine noise exceeds 85 dB (A),

please wear suitable hearing protection.

Device emissions values

Measured sound power level 60.65 db(A)

Device emissions values uncertain-

ty KWA

0.7 db(A)

Guaranteed sound power level 61.4 db(A)

Sound pressure noise level at the

operator’s ear

50 db(A)

The noise emission declaration complies with stand-

ard EN ISO 3744

7. Unpacking

• Open the packaging and carefully remove the prod-

uct.

• Remove the packaging material, as well as the

packaging and transport safety devices (if present).

• Check whether the scope of delivery is complete.

• Check the product and accessory parts for trans-

port damage. In the event of complaints the carrier

must be informed immediately. Later claims will not

be recognised.

• If possible, keep the packaging until the expiry of

the warranty period.

• Familiarise yourself with the product by means of

the operating manual before using for the rst time.

• With accessories as well as wearing parts and re-

placement parts use only original parts. Replace-

ment parts can be obtained from your dealer.

• When ordering please provide our article number

as well as type and year of manufacture for the

product.

m ATTENTION!

The device and the packaging material are not

children‘s toys! Do not let children play with

plastic bags, lms or small parts! There is a dan-

ger of choking or su󰀨ocating!

8. Assembly / Before commissioning

m ATTENTION!

Always make sure the product is fully assembled

before commissioning!

m ATTENTION!

If you intend to use a scarier within the working

area of the robotic mower, the boundary wire (11)

must be buried.

m ATTENTION!

Do not use a strimmer near the boundary wire

(11). Take care when trimming edges near which

the boundary wire (11) is located.

8.1

Setting up / correct position of the charging

station (10)

m ATTENTION

Fix the charging station (10) in place with the

help of a hammer (not included in delivery) and

the anchor pegs (13) only after you have staked

out the complete working area.(Fig. 16).

m NOTE:

Do not make new holes in the charging station.

m NOTE:

Do not stand with your feet on the charging station

plate.

m ATTENTION

The extension cable as well as the mains cable

must be outside the working area to ensure that

it is not damaged.

• The charging station (10) can be placed near a

shed, a garden shed or the house.

• The charging station (10) must be placed on lev-

el ground.

m NOTE:

Do not place the charging station (10) on a slop-

ing or uneven surface, otherwise it will bend and

the function will be impaired or a defect may occur.

• The charging station (10) must be set up/positioned

such that there is at least one metre of space in

front of the charging station (10), without obstacles

or similar. (Fig. 3)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Practixx PX-RRM-600WI Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info