Bedienungsanleitung Practixx PX-RRM-600WI (Seite 35 von 68) (Deutsch, Englisch, Französisch)

782000

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

GB | 27

8.2 Connect the boundary wire (11) to the charg-

ing station (10)

m NOTE:

The boundary wire (11) must be laid at least one

metre long, straight, without corners and obstacles

in front of the charging station (10). This ensures

the mower is able to drive into the charging station

properly (10) (Fig. 3).

• The boundary wire (11) must be laid at least 30 cm

away from boundaries, such as the house wall,

ahead of and after the charging station (10). (Fig.

• Strip approx. 10 mm of insulation from one end of

the boundary wire (11) (Fig. 4).

• Insert the stripped boundary wire (11) into the red

“OUT” cable clamp on the back of the charging sta-

tion (10). Then pass the boundary wire (11) through

the slot under the charging station (10) (Fig. 5).

• Then lay the boundary wire (11) as described in

point 8.3 “Laying the boundary wire (11)”.

• m NOTE:

The boundary wire (11) must be laid at least 100

cm straight in front of the charging station (10).

• After laying the boundary wire (11), trim o󰀨 the ex-

cess wire.

• To connect the second end of the boundary wire

(11), strip approx. 10 mm of insulation from the end

and insert it into the black “IN” cable clamp.

8.3 Laying the boundary wire (11) (Fig. 1/2)

The boundary wire (11) must be laid as a loop around

the working area. When the robot mower (1) ap-

proaches, sensors inside the product detect the

boundary wire (11). The mower changes direction at

a random angle when it reaches the boundary wire

(11).

If the mower needs to return to the charging station

(10), it searches for / drives to the boundary wire (11)

and then turns to the left.

It then travels along the boundary wire (11) back to the

charging station (10).

8.3.1 General notes / boundary cable installation

m ATTENTION:

To avoid damage to the product there must be

an obstacle of min. 15 cm height between the

boundary wire (11) and water bodies/slopes/em-

bankments and/or public roads.

m ATTENTION:

Do not operate the mower on gravel/stones.

m NOTE:

Dene and make a sketch of the working area before

starting to lay the boundary wire (11).

m NOTE:

The max. permissible length for the boundary wire (11)

is 300 m.

• The distance from the boundary wire (11) to the out-

er edge must be 30 cm (Fig. 6).

• A distance of 8 cm between the boundary wire (11) is

su󰀩cient if all of the following apply (Fig. 7):

- the boundary surface can be driven over (e.g.

footpath, driveway or similar).

- the boundary surface is at the same level as the

mowing surface.

- there are no protruding or pointed parts on the

boundary surface that can come into contact with

the mower or blades and damage them.

- there are no plants on the boundary area that

should not be mown.

• The boundary wire (11) can be buried, or fastened in

place using the wire pegs (12) provided.

• When laying the boundary wire (11), the angle in cor-

ners must always be >90° (see Fig. 8+9).

• The robot mower (1) nds areas/passages that taper

or that have a width of ≥ 0.8 m (Fig. 10).

• The minimum width of the mowing area is 0.8 m

(Fig. 10).

• The maximum possible gradient is 35% (20°).

m Attention

To prevent accidents and/or damage to persons or

the product, it is prohibited to operate the product on

steeper terrain.

You can see how to determine the slope in Fig. 11.

m NOTE:

For the demarcation of slopes/embankments, see

point 8.3.3.

m ATTENTION!

If you intend to use a scarier within the working

area of the robotic mower, the boundary wire (11)

must be buried.

8.3.1.1 Burying the boundary wire (11)

• When burying the boundary wire (11), make a nar-

row groove in the grass turf using a spade or sim-

ilar. Then place the wire in the groove and cover it

with soil.

m IMPORTANT:

To ensure trouble-free operation, the boundary

wire (11) may be covered with max. 3 cm of earth.

• After covering the boundary wire (11) with soil, it is

su󰀩cient to compact the loose soil with your body

weight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Practixx PX-RRM-600WI Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info