Bedienungsanleitung Pro-form POWER 1295i - PFTL11716 (Seite 22 von 44) (Englisch)

647861

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

HOW TO SET UP THE CONSOLE

Before using the treadmill for the first time, set up the

console.

1. Connect to your wireless network.

Note: In order to access the internet, download

iFit workouts, and use several other features of

the console, you must be connected to a wireless

network. See HOW TO USE THE WIRELESS

NETWORK MODE on page 31 to connect the con-

sole to your wireless network.

2. Check for firmware updates.

First, see step 1 on page 29 and step 2 on page 30

and select the maintenance mode. Then, see step

3 on page 30 and check for firmware updates.

3. Calibrate the incline system.

See step 4 on page 31 and calibrate the incline

system of the treadmill.

4. Create an iFit account.

Touch the globe button near the lower-left corner of

the screen and touch the iFit button.

The browser will open to the iFit.com home page.

Follow the prompts on the website to sign up for

your iFit membership. Note: For information about

navigating in the browser, see page 28.

The console is now ready for you to begin working out.

The following pages explain the various workouts and

other features that the console offers.

To use the manual mode, see page 22. To use an

onboard workout, see page 24. To use a set-a-goal

workout, see page 25. To use a pulse workout, see

page 26. To use an iFit workout, see page 27.

To use the sound system, see page 28. To use the

internet browser, see page 28. To use the equip-

ment settings mode, see page 29. To use the

maintenance mode, see page 30. To use the wire-

less network mode, see page 31. To use the tablet

holder, see page 32.

IMPORTANT: If there are sheets of plastic on the

console, remove the plastic. To prevent damage

to the walking platform, wear clean athletic shoes

while using the treadmill. The first time you use

the treadmill, observe the alignment of the walking

belt, and center the walking belt if necessary (see

page 35).

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page

21. Note: It may take a minute for the console to

be ready for use.

2. Select the main menu.

When you turn on the power, the main menu will

appear after the console boots up. Touch the home

button in the lower-left corner of the screen (not

shown here) to return to the main menu at any

time.

3. Start the walking belt and adjust the speed.

Touch the

Start button on

the screen or

press the Start

button on the

console to start

the walking

belt. You can

also press the

Manual button on the console, and then touch the

Resume button on the screen. The walking belt will

begin to move at 1 mph. As you exercise, change

the speed of the walking belt as desired by press-

ing the Speed increase and decrease buttons.

Each time you press one of the buttons, the speed

setting will change by 0.1 mph; if you hold down

the button, the speed setting will change in incre-

ments of 0.5 mph.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form POWER 1295i - PFTL11716 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info