Bedienungsanleitung Pro-form POWER 995 C - PFTL99912 (Seite 24 von 36) (Englisch)

553952

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

THE INFORMATION MODE

The console features an information mode that keeps

track of treadmill information and allows you to person-

alize console settings.

1. Select the information mode.

To select the information mode, hold down the Stop

button while inserting the key into the console and

then release the Stop button. When the information

mode is selected, the following information will be

shown:

The Time display will

show the total number

of hours the treadmill

has been used.

The Distance display

will show the total

number of miles or kilo-

meters that the walking

belt has moved.

2. Select the optional screens.

While the information mode is selected, the matrix

will display several optional screens. Press the

decrease button next to the Enter button to select

each of the following screens:

UNITS—To change the unit of measurement, press

the Enter button. To view distance in miles, select

ENGLISH. To view distance in kilometers, select

METRIC.

DEMO—The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. While the demo mode is turned

on, the console will function normally when you

plug in the power cord, press the power switch

into the reset position, and insert the key into the

console. However, when you remove the key, the

displays will remain lit, although the buttons will not

function. If the demo mode is turned on, the word

ON will appear in the center display. To turn on or

turn off the demo mode, press the Enter button or

the Speed decrease button.

CONTRAST LVL—Press the Incline increase and

decrease buttons to adjust the contrast level of the

displays. Then, press the Enter button.

If a module is connected, you may also select the

following screens:

MODULE—If an iFit module is connected, the dis-

play will show the word WIFI. If a USB module is

connected, the display will show the word USB/SD.

AUDIO COACH—To turn on or turn off the audio

coach, press the Enter button.

If an iFit module is connected, you may also select

the following screens:

START MODE—The start mode will appear when

you insert the key into the console or when you

press the Home button. Press the Enter button

repeatedly to select the manual mode or the iFit

mode as the start mode.

CHECK WIFI—Press the Enter button. The cen-

ter display will show the software version number,

the network SSID, the network encryption type,

the wireless signal strength, the IP address of the

module, the number of registered users and their

names, and the results of the DNS lookup.

SEND/OBTAIN DATA—To send and receive work-

outs, workout logs, and updates, press the Enter

button.Whentheprocessisnished,thewords

TRANSFERS DONE will appear in the display.

3. Exit the information mode.

To exit the information mode, remove the key from

the console.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form POWER 995 C - PFTL99912 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info