Bedienungsanleitung Pro-form POWER 995 C - PFTL99912 (Seite 22 von 36) (Englisch)

553952

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO USE A SET-A-GOAL WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 18.

2. Select a set-a-goal workout.

To select a set-a-goal workout, press the Set A

Goal button on the console.

Use the increase and decrease buttons next to

the Enter button to set a calorie, time, or distance

goal, and then press the Enter button. Next, press

the increase and decrease buttons next to the

Enter button to select a goal. Press the Speed and

Incline buttons to select the speed and incline for

the workout. The screen will show the duration and

distance of the workout, and the approximate num-

ber of calories you will burn during the workout.

3. Start the workout.

Press the Start button to start the workout. A

moment after you press the button, the walking belt

will begin to move. Hold the handrails and begin

walking.

The workout will function in the same way as the

manual mode (see pages 18 to 20).

The workout will continue until you reach the goal

that you set. The walking belt will then slow to a

stop.

Note: The calorie goal is an estimate of the

number of calories that you will burn during the

workout. The actual number of calories that you

burn will depend on various factors such as

your weight.

4. Follow your progress with the displays.

See step 5 on page 19.

5. Measure your heart rate if desired.

See step 6 on page 20.

6. Turn on the fan if desired.

See step 7 on page 20.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 20.

HOW TO USE AN IFIT WORKOUT

Note: To use an iFit workout, you must have an

optional iFit module. To purchase an iFit module at

any time, go to www.iFit.com or call the telephone

number on the front cover of this manual. You must

also have access to a computer with a USB port and

an internet connection. In addition, you must have

access to a wireless network including an 802.11b

router with SSID broadcast enabled (hidden networks

are not supported). An iFit.com membership is also

required.

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page

18.

2. Insert the iFit module into the console.

To insert the iFit module, see the instructions in-

cluded with the iFit module.

IMPORTANT: To satisfy exposure compliance

requirements, the antenna and transmitter in

the iFit module must be at least 8 in. (20 cm)

from all persons and must not be near or con-

nected to any other antenna or transmitter.

3. Select a user.

If more than one user is registered, you can switch

users in the iFit main screen. Press the increase

and decrease buttons next to the Enter button to

select a user.

4. Select an iFit workout.

To select an iFit workout, press one of the iFit but-

tons. Before some workouts will download, you

must add them to your schedule on www.iFit.com.

To download an iFit workout in your schedule,

press the Map, Train, or Lose Wt. button to down-

load the next workout of that type in your schedule.

To compete in a race that you have previously

scheduled, press the Compete button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form POWER 995 C - PFTL99912 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info