Bedienungsanleitung Proficare HL 3116 (Seite 14 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814769

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

PC-HL3116_IM 29.06.23

Operation

Switching On / Off

• Press the button to switch on the appliance. The fan

starts to operate. The control lamp FAN lights up.

• Press the button again to switch off the appliance. If

the heating mode was active, the FAN mode is activated

for 30 seconds and the air ap is closed. The appliance

then switches to standby mode.

Swivelling the Air Flap

Press the button to switch the air ap swinging on or

off. The control lamp SWING lights up when the function is

activated.

Heating Function

Press the button repeatedly to switch between the

following modes:

LOW =Low temperature and fan.

Control lamp LOW and FAN light up.

HIGH =High temperature and fan.

Control lamp HIGH and FAN light up.

FAN =Only the fan is active.

Control lamp FAN light up.

Setting the Temperature (TEMP Function)

The appliance automatically selects the heating level ac-

cording to the set temperature. As soon as the set tempera-

ture is reached, the appliance switches off the heating.

The adjustable temperature range is between 18 °C and

45 °C.

1. Press the button.

2. Set the desired temperature with the and buttons.

3. Conrm the entry with the

button. The desired tem-

perature level is automatically maintained.

The control lamp TEMP lights up. This indicates that the

function is activated.

Deleting the Set Temperature

Proceed as follows to delete the previously set temperature:

1. First press the button.

2. To delete the setting, now press the C

button. The

control lamp TEMP goes out.

Timer Function

You can set the appliance to operate for a certain time.

1. Press the button repeatedly to select between one

hour ( ) and eight hours ( ). The setting ( ) disa-

bles the function.

2. After the set time has elapsed, a beep sounds and the

appliance starts a 30-second countdown. The appliance

switches to standby mode after the countdown has

elapsed.

- The activated function is not displayed for technical

reasons.

- The function cannot be selected when the weekly timer

is active.

Setting the Weekly Timer

• The weekly timer cannot be set when the appliance is in

fan mode.

• The weekly timer can also be combined with the TEMP

function, the SWING function and the “Open Window

Detection” function.

• To use the weekly timer, you must rst set the current

time. The current time must be set when the appliance

is rst put into operation and every time the appliance is

disconnected from the mains.

• The days of the week are indicated by the following digits

in the display:

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Set the Current Time:

1. Press the button. The indication (Monday) ap-

pears in the display.

2. Select the current day of the week with the or

button. Conrm the entry with the

button.

3. Entering the hours:

appears in the display. The setting is made with the

/ buttons. Conrm the entry with the

button.

4. Enter the Minutes:

appears in the display. The setting is made with the

/ buttons. Conrm the entry with the

button.

Select the Weekly Timer:

• The appliance has pre-programmed week timers ( to

) and an individually programmable week timer ( ).

• With the weekly timer , the setting must be made for

all days of the week. Only hours can be set, not minutes.

The stop time must be after the start time.

• If the weekly timer is set in the selected mode, the appli-

ance runs until the stop time. Outside the selected mode,

the fan continues to run for 30 seconds. After that, the

appliance switches to standby mode.

• The activated function is indicated by the control lamps

24 / 7 and LOW or HIGH ashing. As soon as the appli-

ance switches on, the control lamps light up.

• The following is a list of the pre-programmed weekly

timers:

Mode Weekdays Time

Monday – Sunday 8:00 – 17:00

Monday – Sunday 18:00 – 7:00*

Monday – Friday 8:00 – 17:00

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare HL 3116 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info