Bedienungsanleitung Proficare HL 3116 (Seite 15 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814769

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

PC-HL3116_IM 29.06.23

Mode Weekdays Time

Monday – Friday 18:00 – 7:00*

Saturday – Sunday 0:00 – 23:59

* The appliance runs until the next morning.

1. Press the button repeatedly to select the desired

weekly timer.

2. Conrm your selection with the

button.

3. Individually programmable weekly timer:

When selecting the week timer , the display now

shows (Monday).

4. Select the desired weekday (Monday) to (Sunday)

with the or button. Conrm the entry with the

button.

5. Now set the start time with the or button.

6. Conrm your selection with the

button.

7. Set the stop time with the or button.

8. Conrm the entry with the

button if you want to set an-

other day of the week. Otherwise, wait until the appliance

slowly scrolls through the weekdays until . The default

setting is then applied.

Deleting the Set Week Timer

Proceed as follows to delete the previously set week timer:

1. First press the button.

2. To delete the setting, now press the C

button. The

control lamp 24 / 7 goes out.

Open Window Detection

• The function can only be selected when the appliance is

in the heating function or in the TEMP function.

• The appliance performs a temperature check at regular

intervals and switches off when the temperature dif-

ference from the previous ambient temperature drops

drastically. is shown in the display.

1. Press the button to switch on the function. The control

lamp TEMP starts ashing.

2. Press the button again to switch the function off.

Ending Operation

1. Press the button to switch off the appliance. If the

heating mode was active, the FAN mode is activated for

30 seconds and the air ap is closed. The appliance then

switches to standby mode.

2. Set the mains switch on the right side of the appliance to

the O position.

3. Then pull the mains plug out of the socket.

Overheat Protection

The appliance features an overheat protection mechanism

causing the appliance to switch off automatically in case of

overheating.

1. Set the mains switch on the right side of the appliance

to the O position. Then pull the mains plug out of the

socket.

2. Let the appliance cool down for approx. 10 minutes

before using it again.

- If the overheat protection mechanism causes the appli-

ance to switch off again after a short period, this might in-

dicate a defect. Switch off the appliance and disconnect

it from the mains. Have the appliance checked by your

dealer or our customer service.

Cleaning

WARNING:

• Always unplug the appliance from the mains before

cleaning and wait until the appliance has cooled down.

• Never immerse the appliance in water to clean it. This

may lead to electrical shock or re.

CAUTION:

• Do not use wire brushes or other abrasive materials.

• Do not use caustic or scouring agents.

• Wipe away dust with a dry cloth.

• Flecks can be removed with a suitably damp cloth.

Dust on the Protective Grille

If dust has collected on the protective grille, this can cause

overheating.

• Remove the dust by careful brushing.

• Use the upholstery nozzle of your vacuum cleaner to

remove the dust.

Technical Data

Model:.................................................................. PC-HL 3116

Power supply:.....................................220 – 240 V~, 50 – 60 Hz

Power consumption: ...................................................2000 W

Protection class: ...................................................................

Net weight: ....................................................... approx. 2.4 kg

The right to make technical and design modications in

the course of continuous product development remains

reserved.

This appliance has been tested according to all applicable,

current CE directives and built according to the latest safety

regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare HL 3116 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info