Bedienungsanleitung Proxxon DSH-E (Seite 11 von 20) (Englisch)

782198

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

- 11 -

The replacement saw blades are stored in the “saw blade

garage" 3, on the side of the panelling of the top arm.

The DSH/E saws soft wood up to a thickness of 2", plastic up

to 1 1/4" and non-ferrous metals up to 0.4".

The saw can also be used without problem for separating

Plexiglas, GRP, foam, rubber, leather and cork.

And so that the dust does not obscure the view of the cutting

line when working, there are automatically driven bellows with

adjustable air nozzle 7. An additional vacuum cleaner can also

be connected. The connecting piece 11 is positioned at 90° to

save space.

This guarantees clean work.

Scope of supply:

1 pc. Scroll Saw DSH/E

1 pc. connector for Vacuum cleaner

1 pc. Bag with air nozzle incl. accessories

5 pc. Saw blades 18 teeth

5 pc. Saw blades 25 teeth

1 pc. Allen key with T-handle

1 pc. Operating manual

7 Technical data

No. of strokes: 400-1.600 strokes per min.

Stroke height: 3/4"

Max. cutting

height (90°): 2"

Max. cutting

height (45°): 1"

Table tilt: 0-45°

Cutting blade length: 5" Pin-Type or Plain End (without

cross pin)

Net weight: 34.6 lb

Dimensions:

LxWxH

20 7/8" x 10 5/8" x 11 13/16"

Table: 14 1/8" x 10 5/8"

Depth of Throat: 15 3/4"

Motor:

Voltage: 110-120 V, 60 Hz

Amps: 1.6 A

8 Set-up and commissioning of the saw:

CAUTION:

For your own safety, do not operate your Scroll Saw until it is

completely assembled and installed according to the following

instructions!

Disconnect power to the machine during the entire assembly

process. Failure to do this may result in serious personal

injury.

8.1 Unpacking (fig. 1a and 1b):

Disconnect power to the machine during the entire assembly

process. Failure to do this may result in serious personal

injury.

1. Unpack the device and remove it from the box. Ensure that

the device is not lifted by the plastic panelling around the

top arm 4 (as shown on the sheet attached to the

packaging).

2. For transport reasons, the saw table is tilted up at an angle

of about 45°. Turn the toggle 10 to tilt the table back into

the horizontal position (the precise setting is described

below). Then thighten the toggle 10 again.

8.2 Attaching Blade Guard

Your DSH/E Scroll Saw is provided with the attached blade

guard. But for some of the actions and adjustments described

in this manual it could be necessary to detach the blade

guard.

Attaching and detaching the blade guard:

1. Bend up the saw blade guard on the upper side and hang it

out like shown in illustration 2a.

2. For attaching the saw blade guard just act the opposite

way around: Bend up the saw blade guard on the upper

side and hang it in. There are holes in the upper cover

designed for that.

8.3 Setting up the saw:

NOTE:

Safe and precise work is only possible with careful fixing!

Bolt your Scroll Sas securely to a stand or workbench. If there

is any tendency for the Scroll Saw to tip over or move during

certain operations (for example cutting long, heavy boards),

fix the Scroll Saw stand or the workbench to the floor.

1. Secure saw with two screws (not included in scope of

delivery) on a solid workbench. Use the drill holes intended

for this purpose (17, fig. 1) which are located at the front

and back of the saw base.

The saw is equipped with rubber feet for noise insulation. If

required, you can also place an additional plastic or cork

underlay between the machine and the standing surface (not

included in scope of delivery!).

Proxxon_BedienAnl_DSH_US_Bel 10.06.2005 14:20 Uhr Seite 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon DSH-E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Proxxon DSH-E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info