Bedienungsanleitung Proxxon DSH-E (Seite 10 von 20) (Englisch)

782198

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

- 10 -

4 Grounding instructions

All grounded, cord-connected tools:

In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current to

reduce the risk of electric shock. This tool is equipped with an

electric cord having an equipment-grounding conductor and a

grounding plug. The plug must be plugged into a matching

outlet that is properly installed and grounded in accordance

with all local codes and ordinances. Do not modify the plug

provided - if it will not fit the outlet, have the proper outlet

installed by a qualified electrician. Improper connection of the

equipment-grounding conductor can result in a risk of electric

shock. The conductor with insulation having an outer surface

that is green with or without yellow stripes is the equipment-

grounding conductor. If repair or replacement of the electric

cord or plug is necessary, do not connect the equipment-

grounding conductor to a live terminal. Check with a qualified

electrician or service personnel if the grounding instructions

are not completely understood, or if in doubt as to whether

the tool is properly grounded. Use only 3-wire extension cords

that have 3-prong grounding plugs and 3-pole receptacles

that accept the tool's plug.

Repair or replace damaged or worn cord immediately.

Grounded, cord-connected tools intended for use on a supply

circuit having a nominal rating less than 150 volts:

This tool is intended for use on a circuit that has an outlet that

looks like the one illustrated in Sketch A in Figure 9. The tool

has a grounding plug that looks like the plug illustrated in

Sketch A in Figure 9 temporary adapter, which looks like the

adapter illustrated in Sketches B and C, may be used to

connect this plug to a 2-pole receptacle as shown in Sketch B

if a properly grounded outlet is not available. The temporary

adapter should be used only until a properly grounded outlet

can be installed by a qualified electrician. The green-colored

rigid ear, lug, and the like, extending from the adapter must be

connected to a permanent ground such as a properly

grounded outlet box.

5 Legend (fig. 1)

1. Quick tensioning clamp for saw blade tensioning

2. Fine adjustment for saw blade tensioning

3. Storage compartment for saw blades

4. Saw frame

5. Saw blade mount, top

6. Saw blade mount, bottom

7. Air nozzle

8. ON OFF switch

9. Stroke rate regulating button

10. Tilting Locking Knob

11. Connecting piece for vacuum cleaner

12. Cast steel base

13. Direct current motor

14. Saw table

15. Saw blade

16. Mains cable

17. Drill holes for fastening screws

18. Allen key with T-Handle

19. Saw blades

20. Blade guard

6 Description of machine

(also see fig. 1a and 1b)

The PROXXON mechanical scroll saw is a very solid and

robustly designed device. The heavy base made of cast

material, item 12, forms a solid basis for the expensive

mechanism of the machine which can work vibration-free,

precisely positioned and driven by an electronically controlled

direct current motor 13.

The areas of application are multifaceted. Your DSH/E is

particularly suitable for mould construction, precision

engineering model building and toy manufacture. For this

reason, it is precisely the right tool for designers, architects

(model building) and carpenters.

The large-area, saw table 14 1/8" x 10 5/8" for mitre cuts can

be titled up to 45°, is manufactured from aluminium die

casting for the highest precision and stability, and is then

ground for optimal glide properties.

The high quality saw blade mounts (5 and 6) and the innovative

quick clamping 1 also guarantee a lot of pleasure while working

and a convincing working result.

Changing the saw blades 15 is very simple with the quick

tensioning clamp. Saw blades with flat ends (without pin) are

introduced into the clamp adapter when the quick tensioning

device is released, clamped by tightening the screw and then

tightened with the tensioning device.

Changing saw blades with pins is even easier. These are

simply attached when the quick clamp is released and then

clamped using the quick clamp device.

The saw blade tensioning can then be set by the large rotary

button 2 at the top end of the arm.

Fig. 9

GROUNDING

ADAPTER

GROUNDING GROUNDING

MEANS

METAL SCREW

COVER OF GROUNDED

OUTLET BOX

<A> <B>

<C>

<D>

Proxxon_BedienAnl_DSH_US_Bel 10.06.2005 14:20 Uhr Seite 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon DSH-E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Proxxon DSH-E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info