Bedienungsanleitung Proxxon FF 230 (Seite 5 von 16) (Englisch)

782209

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

-5-

Additional safety instructions

This milling machine is for indoor use only.Do not expose

to rain or use in damp locations.

Use only accessories recommended for this milling

machine. Follow the instructions that accompany

accessories.Use of improper accessories may cause

hazards.

Do not attempt to modify this tool or createaccessories not

recommended for use with this tool. Any suchalternation or

modification is misuseand could result in hazardous

condition leading to possible serious injury.

Toavoid injury from unexpected starting or electrical shock,

do not plug the power cord intoapower source receptacle

during unpacking and assembly.This cord must remain

unplugged whenever you are working on the milling

machine.

Ifany part is missing or damaged,do not plug the milling

machine in until the missing or damaged part is replaced,

and assembly is complete. Toavoid electrical shock, use

only identical replacement parts when servicing grounded

tools.

For your safety,never connect the plug to the power source

receptacle until the assembly and adjustment steps are

completed, and you have readand understood the safety

and operating instructions.

Toavoid injury from accidental start,make sure the switch

is in the OFF position and the plug is not connected to the

power source receptacle beforechanging any parts or tools

(i. e. miller).

Toavoid injury from accidental start,make sure the switch

is in the OFF position and the plug is not connected to the

power source receptacle before making any adjustments.

For your own safety,do not plug the tool into the power

source receptacle or insert the switch key, until the parts

arecorrectly installed and adjustments havebeen made.

For your own safety, use only millers sized and recommen-

ded for this milling machine. Follow the instructions that

accompany the millers.

Toavoid fire or toxic reaction,never use gasoline,naphtha,

acetone,lacquer thinner,or similar highly volatile solvents to

clean the milling machine.

Do not allow brake fluids,gasoline,or penetrating oils to

come in contact with the plasticparts.They contain

chemicals that can damage or destroy plastics.

Only qualified service technicians should do all electrical or

mechanical repairs.

When servicing use only PROXXON replacement parts.Use

of any other parts may createahazard or cause product

damage.

Any attempt to repair or replace electrical parts on this lathe

may createahazard unless repair is done by aqualified

service technician. Repair service is available at your

PROXXON servicecenter (You find the address at the back

of this manual).

Grounding instructions

1. All grounded, cord-connected tools:

In the event of amalfunction or breakdown,grounding

provides apath of least resistance for electric current to

reduce the risk of electric shock. This tool is equipped with

an electric cord having an equipment-grounding conductor

and agrounding plug. The plug must be plugged intoa

matching outlet that is properly installed and grounded in

accordance withall localcodes and ordinances.Do not

modify the plug provided -if it will not fit the outlet,have the

proper outlet installed by aqualified electrician.

Improper connection of the equipment-grounding conduc-

tor can result in a risk of electric shock. The conductor with

insulation having an outer surface that is green with or

without yellow stripes is the equipment-grounding

conductor.If repair or replacement of the electric cord or

plug is necessary,do not connect the equipment-grounding

conductor toalive terminal. Check withaqualified

electrician or service personnel if the grounding instructions

are not completely understood,or if in doubt as to whether

the tool is properly grounded. Use only

3-wire extension cords that have 3-prong grounding plugs

and

3-pole receptacles that accept the tool's plug.

Repair or replace damaged or worncord immediately.

2.Grounded, cord-connected tools intended for use on a

supply circuit having anominal rating less than 150 volts:

This tool is intended for use on a circuit that has an outlet

that looks like the one illustrated in SketchAin Figure 18.

The tool has agrounding plug that looks like the plug

illustrated in SketchAin Figure 18 A temporary adapter,

which looks like the adapter illustrated in Sketches B and

C, may be used toconnect this plug toa 2-pole receptacle

as shown in SketchBif aproperly grounded outlet is not

available. The temporary adapter should be used only until

aproperly grounded outlet canbe installed by aqualified

electrician. The green-colored rigid ear,lug, and the like,

extending from the adapter must beconnected toa

permanent ground suchas aproperly grounded outlet box.

Grounding methods

Fig. 18

ADAPTER

GROUNDING GROUNDING

MEANS

METAL SCREW

COVER OF GROUNDED

OUTLET BOX

<A><B>

<C>

<D>

GROUNDING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon FF 230 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info