782209
6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
- 6 -
Table 1
Minimum gage for cord
AmpereRating Volts Total length of cord in feet
120 V25 ft.50 ft.100 ft.150 ft.
240 V50 ft.100 ft.200 ft.300 ft.
MoreNot MoreAWG
ThanThan
06 18 161614
61018 1614 12
1012161614 12
121614 12Not Recommended
Note:
Keep this instruction manual in an easily accessible place.
Only operate this machine if you are qualified to do soand
follow the guidelines in this instruction manual.
PROXXON does not accept responsibility for the safe
functioning of the machine
if it is handled in amanner whichconstitutes improper
use,
if it is used for other purposes whichare not specified in
the instruction manual,
if the safety regulations are not observed.
Warranty claims are invalid if
the machine is incorrectly operated,
the machine has not been sufficiently maintained.
In the interests of your safety,pleasealways observe the
safety regulations.Only use genuine PROXXON spare parts.
We reserve the right to make further alterations for the
purpose of technical progress.We wish you every success
with your machine.
Description of the machine
The PROXXON KT 230 Compound Table and the PF 230
Milling Machine are ideally suited to the machining of
plastics,light metals or steel. When working with the
compound table,pleasealways observe the safety
regulations for the drilling or milling machine which is in use
and please remember that the compound table and milling
machine are precision tools.Therefore,pleasealways work
with duecare.
W arning:
This Milling machine for indoor use only.Do not expose to
rain or use in damp locations!
W arning:
Do not attempt to modify this tool or createaccessories not
recommended for use with this tool. Any suchalternation or
modification is misuseand could result in hazardous
condition leading to possible serious injury!
W arning:
While using the compound table always follow the security
instructions of the used drilling or milling device!
We offer you the following options for the 230 fine milling
system:
KT 230:
•Operating instructions and safety regulations
•Compound-type table
PF 230:
1. Milling spindle, complete with motor and belt
transmission
2.Pillar (Ø 34mm)
3.Mounting block for lathe (not included in FF 230)
4. Collet chucks Ø 6,8, and 10 mm incl. union nut
5. Milling table withT-grooves (not included in FF 230)
6.Auxiliary tools
7.Operating instructions and safety regulations
FF 230:
1. Comprises the PF 230 milling assembly complete with
KT 230 compound-type table, but without groove table,
item 16 in Fig. 1.
General view, PF 230 milling machine (Fig. 1)
1. Motor
2.Cover
3.On / Off switch
4. Speed Table
5. Motor mounting screw
6.Knurled screw for cover
7.Union nut for collet chuck
8. Clamp screw for sleeve
9. Scale for depthadjustment
10.Drill lever
11. Pillar (Ø 34mm)
12.Mounting block for lathe
13.Handwheel for height adjustment
14. Screw for height adjustment
15. Scale for angle adjustment
16.Milling table for lathe PD 230/E
(Not included withFF 230 milling machine, but only
withPF 230)
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Proxxon FF 230 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info