782214
15
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
- 15 -
6.2 Notes on grinding speed
The grinding speed of your TG 125/E is infinitely
adjustable from approx. 250 – 800 m/min. In this way,
optimal adaptation to various material conditions is
possible. Please note that the circumferential speed
of the grinding disc is greatest at the edge and
reduces towards the middle.
General recommendations on the selection of the
grinding speed are difficult; it may be necessary to
experiment somewhat to find out the correct grinding
speed for "its" material and workpiece.
Based on experience, non-ferrous metals and plastic
require lower grinding speeds than soft and hard
wood; this also applies for ceramics and glass.
But as stated: Recommendations are difficult, the
correct speed depends on the material, contact pres-
sure and friction and grain size of the grinding
wheels.
7 Care and maintenance
Caution:
Before cleaning, adjusting, service or repair, discon-
nect the mains plug!
Note:
The machine is largely maintenance free. To ensure a
long service life, however, the machine should be
cleaned with a soft cloth, handbrush or paintbrush
after each time it is used. A vacuum cleaner is also
recommended here. A vacuum cleaner should always
be used during work!
The outside of the housing can be cleaned with a
soft, possibly damp cloth. In this process, mild soap
or another suitable cleaning agent can be used. Sol-
vents or cleaning agents containing alcohol (e.g.
petrol, cleaning alcohols etc.) should be avoided,
since these can attack the plastic cases.
8 Disposal
Please do not dispose of this machine in household
refuse! The machine contains materials that can be
recycled. If you have any questions about his, please
contact your local recycling company or other rele-
vant communal facilities.
9 EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: TG 125/E
Article No.: 27060
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
EU EMC Directive 2014/30/EC
DIN EN 55014-1/05.2012
DIN EN 55014-2/02.2016
DIN EN 61000-3-2/03.2015
DIN EN 61000-3-3/03.2014
EU Machinery Directive 2006/42/EC
DIN EN 62841-1/07.2016
Date: 26.07.2018
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with
the signatory.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Proxxon TG 125-E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info