Bedienungsanleitung Rebox RE-2250MG (Seite 38 von 47) (Holländisch)

7894

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

www.rebox.tv

• Connection Settings: You can set the connection settings to your personal preferences. Check your TV

and VCR user manuals for the correct settings. You can change your Connection settings by applying the

following steps:

1. Select “Connection” and press OK or the Right button (Figure 19)

• TV Mode: Press OK or the Right button and set your TV mode to “Multi”, “PAL” or “NTSC”.

• Video Output: Press OK or the Right button and set your Video mode to “CVBS” (Composite

video) or “RGB” (preferred option if your TV set is compatible with it).

• TV mode: Press OK or the Right button and set your screen mode to “4 : 3” , “4 : 3 Letterbox”, or

“16 : 9” format. This depends on the format of your TV.

• Audio Output : Press OK or the Right button and set your audio output to “Stereo”, “Left” or “Right”

(left or Right is for mono TV sets)

• S/PDIF Output: Press OK or the Right button and activate your S/PDIF output on the back of your

receiver, so you can connect it to a digital Audio amplifier using an coaxial cable. If you have

connected your digital amplifier, set the SPDIF output to: “Enabled”.

• VCR Output: Press OK or the Right button and set the scart output to “Automatic” or “Terminal”. If

set to “Terminal”, the VCR scart signal is not automatically looped through.

• RF modulator: Press OK or the Right button and set the UHF mode to “PAL B/G”, “PAL I” or “PAL

D/K”. If the TV set is connected using a coaxial (RF) cable, you must select RF modulator type

here. The RF modulator type affects the channel audio. (Select PAL I for UK , Pal B/G for use in

Central Europe).

• RF Channel: Press OK or the Right button and set the UHF channel number to the same UHF

channel number of your TV set. This only has to be done if your TV set is connected with a coaxial

(RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no

picture will be displayed.

2. Press BACK until you go back to main menu.

Menu Settings: You can set the OSD (On Screen Display) to your personal preferences. You can change the OSD

settings by applying the following steps:

1. Select “Menu Settings” and press OK or the Right button.

• Color Scheme: Press OK or the Right button and set the colours of the OSD menu to

“Standard”, “Color 1” or “Color 2”.

• Transparency: Press OK or the Right button and select how transparent you want

your OSD.

• Brightness: Press OK or the Right button and select how you want the OSD to be.

• Duration: Press OK or the Right button and select how long you want the information

banner to be on the screen when starting up your receiver or when changing

channels.

2. Press BACK until you go back to main menu.

• Time setting: The system uses GMT (Greenwich Mean Time) as a default. To set the time, apply the

following steps:

1. Select “Time Settings” and press OK or the Right button.

• Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours

you need for your country is displayed. Using UP/DOWN keys select the correct one, and the

receiver will automatically show the current time in your country.

To set the time manually:

• Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT

usage to “off”. Press OK to save your setting. The time setting menu will now activate the bottom

two fields of the menu.

• Adjust Time: Use your Numeric buttons [0-9] to set the local time. Once set, press OK to save the

time.

• Select Set Date: Press OK or the Right button and set the date the way you have set the time.

Note: We advise you to use the GMT time settings, if you use the manual time settings, the time will be lost after the

unit has been disconnected from the mainpower.

2. Press the BACK button until you go back to the Main Menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rebox RE-2250MG Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info