Bedienungsanleitung Rebox RE-2250MG (Seite 39 von 47) (Holländisch)

7894

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

www.rebox.tv

• Power on Channel: This function allows you to set the channel you want when the receiver turns on. To

set the power on channel, apply the following steps (Figure 18):

1. Select Power on Channel and press OK or the Right button.

• Last Channel: The receiver will start-up with the channel that you viewed before turning the

receiver off.

• Defined Channel: This function allows you to set the channel you want when the receiver

turns on. To define the channel, apply the following steps:

1. Press OK or the Right button and select in the TV or radio list of channels the channel you

want to have your receiver start-up with.

• Software Upgrade: You can download the latest software available including new technologies to your

receiver. To upgrade your system, apply the following steps:

1. Select “Software Upgrade” and press OK. Enter your PIN code.

2. Press the Green button to scan the satellite for availability of a newer software version. If

there is a recent software version available for your receiver, it will be detected.

3. Press the Red button to start the upgrade.

4. Press the BACK button until you go back to main menu.

Note: Be sure that your receiver is connected to the satellite signal. Do not turn off your receiver while you

are downloading new software.

System Info: The system information displays information about your receiver such as model

number,software and boot version. To check system information, apply the following steps:

1. Select “System information” and press OK. Press Back to return to the menu

Mediaguard: Here you will find information about the embedded Mediaguard decoder.

Select “Mediaguard” and press OK. Press Back to return to the menu (Figure 20)

Factory Reset: Be careful when using this function, because it will erase all the data and parameters you

may have set earlier to your receiver. Once you have made a Factory Reset you will have to re-install

your preferences and re-scan your channels. To reset your receiver to factory default, apply the

following steps:

Select “Factory Reset” and press OK.

Enter your PIN Code. The receiver will reset itself to the original factory settings.

Note: Your PIN code will change back to the factory setting “0000”.

5.1.4.2 LNB Set-up

It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC switch, your

0/12V switch and your Positioner before you start setting up your LNB. To set up your LNB, please apply the

following steps:

1. Press the Menu button.

2. Using UP/DOWN keys, select "Installation" and press OK.

3. Using UP/DOWN keys, select "LNB Set-up" and press OK (Figure 22)

4. Check the exact specifications of your LNB through the manufacturers informationor your dealer.

There are up to 16 types of LNB's available. The Default is set to Universal mode

(9750/10600MHz), DiSEqC is not used and the LNB is mounted on a fixed dish.

5. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT buttons to set

up any values.

• LNB: Up to 16 LNBs are available, select and set-up the correct one according to your LNB

specifications. Press OK on the LNB number that you want to set-up.

• LNB Type: Select the LNB type from Universal 1 ~ 3, and Single. You should type the LNB

value in Single. In Single, the item parameter is 0 or another number. In UNI1=9750/10600

MHz, UNI2=9750/10700 MHz, UNI3=9750/10750 MHz.

• LNB Power: Select 13/18V, 13V or 18V for LNB. Select “Off” if you want to switch the power

of the LNB off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rebox RE-2250MG Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info