Bedienungsanleitung Ricoh 1140L (Seite 25 von 59) (Englisch)

451336

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Laser Facsimile

- 22 -

4 - Fax

Fax

This chapter describes all the fax processing and

configuration functions.

Fax transmission

Immediate transmission

1 Place the document to be copied in the automatic

document feeder, face printed on the top.

2 Enter the fax number then press .

The icon flashes during the call phase and it

stays lit when both faxes are in communication.

3 At the end of transmission the initial screen is

displayed.

Delayed transmission

This function allows you to transmit a document at a later

time.

To program a postponed transmission you need to

identify the subscriber number, transmission time, feeder

type and number of pages.

To delay the transmission time of your document :

1 Place the document to be copied in the automatic

document feeder, face printed on the top.

2 Select

31 -FAX / TRANSMISSION.

3 Enter the subscriber number you wish to program

at a different time or choose your dialling mode and

confirm with OK.

4 Next to the current time, enter the new time and

confirm with OK.

5 Choose B&W SCAN or COLOUR SCAN.

6 Adjust the contrast and confirm with OK.

7 Select the feed type, FEEDER or MEMORY and

confirm with OK.

8 You may enter the number of pages before

transmission and confirm with OK.

Your document is stored and will be sent at the new time.

Transmission with auto redial

This function allows you to monitor the dialling operation

during a fax transmission. In this case, the maximum

transmission rate will be 14400 bps.

This function allows for example:

• to hear if the subscriber’s fax is engaged and if so,

choose the moment when the line is clear to start the

document transmission.

• to control the communication progress in case of

uncertain numbers, etc.

To take the line manually:

1 Place the document in the fax feeder.

2 Press .

3 Enter the subscriber number.

As soon as you hear the remote fax tone, the line is

clear and you can start the transmission.

4 Press to start the document transmission.

If your machine is set in order to print a transmission

report, the reduced copy of the document first page will

not be printed and it notifies you that the communication

is manual.

Fax reception

Fax reception depends on the parameter settings of your

machine.

The following parameters let you customize the printing of

received faxes :

- Reception Mode, page 28;

- Reception without paper, page 28;

- Number of copies, page 28;

- Fax or PC reception (MFP model only), page 28;

- Received faxes reduction mode, page 28;

- Technical Parameters, page 29.

The following tables gives which tray is used to print

received fax depending on the default tray and the paper

format in both trays.

Default tray set to Manual :.

Note

To change the dialling mode after

entering the fax number, press

OK.

Important

Make sure that the document in the

feeder tray or on the scanner window

is properly located in order to avoid

sending blank or incorrect pages.

Important

The printing is not possible on A5

paper format.

Manual tray

paper format

Main tray

paper format

Action

A4,Letter and

Legal

A4,Letter and

Legal

The fax is printed on

manual tray.

A4,Letter and

Legal

The fax is printed on

manual tray.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ricoh 1140L Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ricoh 1140L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info