Bedienungsanleitung Roland BK-3 (Seite 10 von 76) (Englisch)

527388

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

4. Panel Description

Left Front Panel

Pitch Bend/Modulation lever

You can raise or lower the pitch by moving this lever to the left

or right. Push the lever away from yourself to apply modulation

(normally vibrato) to the sound.

VOLUME knob

Use this knob to set BK-3’s global output volume (all signals

transmitted to the speakers and PHONES/OUTPUT sockets).

RHYTHM FAMILY buttons

These buttons are used to select the family of the next rhythm you

want to use. Pressing one of these buttons calls up a list of all rhythms

contained in the selected family. Pressing and holding this button

locks the currently selected rhythm (p. 39).

TAP TEMPO button

Pressing this button several times allows you to change the current

rhythm or song tempo to the value calculated from the speed at

which the button is pressed.

TEMPO buttons

These buttons can be used to decrease or increase the tempo of the

currently selected rhythm or song. Pressing them together recalls the

rhythm or song stored tempo value.

MEMO

You can also use the [TAP TEMPO] button to set the desired tempo

SYNC START button

This button is used to activate or switch o the BK-3’s Sync Start or

Sync Stop function. If it is on, rhythm playback can be started or

stopped by simply playing a note or chord on the keyboard. (p. 22).

While a song le is selected, this button stops playback.

BALANCE buttons

These buttons allow you to set the balance between the rhythms and

songs (BACKING) and the real-time parts (KEYBOARD).

BASS INV button

This button is used to switch the Bass Inversion function on and o (p.

23).Press and hold it while pressing the [AUTO FILL IN] button you

will activate/deactivate the Visual Control (p. 61).

AUTO FILL IN button

This button is used to activate the Auto Fill-In function, which causes

a transition to be played before selecting the new rhythm variation

(which is selected with the VARIATION buttons). Press and hold it

while pressing the [BASS INV] button you will activate/deactivate the

Visual Control (p.61).

VARIATION 1/2/3/4 buttons

These buttons are used to select a rhythm “Variation”, i.e. a simpler or

more complex arrangement of the selected rhythm. When a song is

selected the MARK buttons (Variation3/4) allow you to set and use

playback loops. See “Loop function (MARK A/B)” (p. 30).

INTRO button

When you activate this button, rhythm playback starts with a musical

introduction whose complexity depends on which VARIATION button

currently lights (there are four dierent introductions per rhythm).

After selecting a song le, this button allows you to rewind.

ENDING button

When you activate this button, rhythm playback stops with a musical

ending whose complexity depends on which VARIATION button

currently lights (there are four dierent ending phrases per rhythm).

After selecting a song le, this button allows you to fast-forward.

START/STOP button

This button allows you to start and stop rhythm playback. If you select

a song, it starts and temporarily stops (pause) song playback.

7 8 9

10 11 12 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info