Bedienungsanleitung Roland BK-5 (Seite 78 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

Backing Keyboard BK-5

Write User

This function allows you to save the settings you

made on the “Compressor” page.

Press the [WRITE] button.

Rotate the [CURSOR÷VALUE] dial to select

“YES”, then press the [ENTER/SELECT] but-

ton to save the current settings.

The display shows a confirmation message.

If you don’t want to define the current settings as

the default state, rotate the [CURSOR÷VALUE] dial to

select “NO”, then press the [ENTER/SELECT] button.

The BK-5 then returns to the “Compressor” page.

NOTE

There is only one “User” memory for your own settings. By

saving new settings, you therefore overwrite the previous

ones.

NOTE

When you switch on the BK-5, it automatically loads the

“User” settings.

Equalizer

To edit the Equalizer parameters, use [MENU] button ‰

“Mastering Tools” ‰ “Equalizer”.

The equalizer has the same function as the TREBLE, MID

and BASS knobs on a mixer: it allows you to color the

sound, or to apply tonal corrections.

Select a keyboard part, an SMF song or a

rhythm and start playback.

Set the “Switch” parameter to “On” to acti-

vate the equalizer.

The equalizer is now active and will affect the key-

board parts and SMF song or rhythm playback.

(Select “Off” to switch the equalizer back off.)

Use the [CURSOR÷VALUE] dial to select the

“Preset” parameter, then press the [ENTER/

SELECT] button.

Rotate the [CURSOR÷VALUE] dial to select

one of the available presets.

The available presets are:

Threshold –36~0dB This parameter allows you to

set the level the frequency

band (“High”, “Mid” or

“Low”) must reach to trigger

its compressor. The lower

the value, the more notice-

able the compression will be.

Ratio 1:1.0~

1:INF

Use this parameter to spec-

ify how strongly the level

should be reduced when the

band’s level exceeds the

“Threshold” level. “1:2.0”, for

example, means that level

values above the “Threshold”

level are halved. “1:INF” is

useful if you set “Threshold”

to “0dB” or thereabout. This

produces a limiter effect,

which means that no signal

level will ever exceed the

“Threshold” value. This may

help you protect the speak-

ers of the PA system etc.

Level –24~

+24dB

This parameter allows you to

establish the desired mix

among the three compressor

bands. Choose a negative

value to decrease the level,

or a positive one to increase

it. Choose “0” for a band

whose level is OK as is.

Split High 2000~

12000Hz

These two parameters spec-

ify the frequency where two

bands are separated. The

compressor has three bands,

and so there are two cross-

over frequencies you can

set: “High” between the

“Mid” and “High” ranges;

and “Low” between the

“Mid” and “Low” ranges.

Split Low 80~800Hz

Parameter Setting Explanation

1. Flat

2. Rock

3. Pop

4. Jazz

5. Classic

6. Standard

7. User

BK-5_US.book Page 78 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info