Bedienungsanleitung Roland DJ-505 (Seite 14 von 32) (Englisch)

710374

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-505

Slicer Operations (SLICER)

Slicer divides the specied region into eight, and assigns the divided

regions to the performance pads. While you hold down a performance pad,

the sound of the region assigned to that pad plays as a loop.

The song continues progressing in the background even while looping.

When you cancel loop playback, song playback resumes from the location

to which the song had progressed during loop playback.

NOTE

5 Slicer can only be used during the song playback.

5 You can’t use the slicer on a song for which the beat grid is not

specied. For details on the beat grid, refer to the Serato DJ owner’s

manual.

1. Hold down the [SHIFT] button and press the [ROLL] button to

make the button light in red.

Slicer mode is selected.

MEMO

If you hold down the [SHIFT] button and press the [ROLL] button twice

to make the button light in blue, slicer loop mode is selected.

2. Hold down the [SHIFT] button and use the PARAMETER [−] [+]

buttons to select the length (beats) of the specied region.

The setting changes each time you press the button.

The length of the specied region can be set to 2 beats, 4 beats, 8 beats,

16 beats, 32 beats, or 64 beats.

The eight divided regions are assigned to the performance pads as

follows.

1 8765432

Region 1 Region 2 Region 3 Region 4

Region 5 Region 6 Region 7 Region 8

3. Use the PARAMETER [−] [+] buttons to specify the slicer’s

quantize setting.

The quantize setting changes the length of loop playback that occurs

when you hold down a pad.

You can choose from four types of quantize setting.

Example:

If quantize is set to 1:

The entire region assigned to the pad you press is played as a loop.

If quantize is set to 1/2:

The rst 1/2 of the region assigned to the pad you press is played as a

loop.

4. Hold down a performance pad.

While you hold down the pad, the length that you specied by the

quantize setting is continuously played as a loop.

5. Release the performance pad.

Song playback resumes from the location to which the song had

progressed during loop playback.

Using slicer mode and slicer loop mode

Slicer mode

When the playback location progresses to the end of the region that was

divided into eight, the region on the screen shifts to show the next eight

divisions, and that region divided into eight is assigned to the pads.

1 8765432 1 8765432

Slicer loop mode

When the playback location progresses to the end of the region that was

divided into eight, the playback location returns to the beginning of the

currently-specied region.

1 8765432 1 8765432

Saved Loop Operations

You can save loops in Serato DJ’s loop slots, and recall a saved loop.

1. Press the [ROLL] button twice to make the button light green.

Saved loop mode is selected.

2. During loop playback, press a performance pad.

The loop is assigned to Serato DJ’s loop slot.

Slot 1 Slot 2 Slot 3 Slot 4

Slot 5 Slot 6 Slot 7 Slot 8

3. Hold down the [SHIFT] button and press a performance pad.

Playback returns to the beginning of the loop and continues.

5 During loop playback, press the LOOP [1/2X] button

The loop playback length is halved.

5 During loop playback, press the LOOP [2X] button

The loop playback length is doubled.

5 During loop playback, hold down the [SHIFT] button and press the

LOOP [1/2X] button

The loop length remains the same, and you move to the previous loop.

5 During loop playback, hold down the [SHIFT] button and press the

LOOP [2X] button

The loop length remains the same, and you move to the next loop.

* If you change the length of the recalled loop, the loop settings are

saved (overwritten).

4. Press the same performance pad once again.

Loop playback is cancelled.

TR Operations (TR)

You can play TR instruments.

1. Press the [TR] button to make the button light red.

TR mode is selected.

Instruments are assigned to the performance pads as follows.

BD SD CH OH

LT HC RS RC

2. Press a performance pad.

You hear the instrument.

MEMO

You can use the PARAMETER [–] [+] buttons to specify the velocity.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-505 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info