Bedienungsanleitung Roland DJ-505 (Seite 15 von 32) (Englisch)

710374

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-505

Pattern Operations (PATTERN)

You can press the performance pads to switch TR-S patterns (p. 18).

1. Hold down the [SHIFT] button and press the [TR] button to

make the button light in green.

Pattern mode is selected.

Patterns are assigned to the performance pads as follows.

Pattern

Press the [SHIFT] button to select patterns 9–16.

Pattern

2. Press a performance pad, or hold down the [SHIFT] button and

press a performance pad, to select the pattern that you want

to play.

5 If you had been playing a pattern, the pattern nishes playing; then the

pattern that’s assigned to the performance pad that you pressed starts

playing.

5 By holding down a performance pad and pressing the performance

pad that you want to play next, you can play back the selected

performances consecutively.

TR Velocity Operations

The functionality is the same as in TR mode, but when you press a pad in

the upper row, the volume of the instrument changes depending on how

strongly you press the pad.

1. Press the [TR] button twice to make the button light in orange.

TR velocity mode is selected.

BD SD CH OH

LT HC RS RC

2. Press a performance pad.

You hear the instrument. The volume of the instrument changes

depending on how strongly you press the pad. The stronger you press the

pad, the louder the instrument’s volume.

Serato Sampler Operations (SAMPLER)

You can use the performance pads to play songs (samples) that are loaded

into Serato Sampler’s sample slots.

1. In Serato DJ, click the [Sampler] key to access the Samples

panel.

2. Press the [SAMPLER] button to make it light in magenta.

Sampler mode is selected.

3. Use the PARAMETER [−] [+] buttons to switch the Serato

Sampler’s banks.

The Serato Sampler has four banks (A–D), and each bank has eight slots.

4. Drag and drop songs into the Sampler panel to load a sample

into each slot of the Sampler panel.

The sampler settings and the loaded samples are saved.

* You can also load a sample by using the rotary selector to select a

sample and then pressing a performance pad while holding down the

[SHIFT] button.

5. Press a performance pad.

The sample of the slot that’s assigned to the pad you pressed is played.

Slot 1 Slot 2 Slot 3 Slot 4

Slot 5 Slot 6 Slot 7 Slot 8

* The type of playback changes depending Serato Sampler’s playback

mode. For details, refer to the Serato DJ owner’s manual.

MEMO

If you hold down the [SHIFT] button and press the performance pad,

sample playback stops.

Pitch Play Operations (PITCH PLAY)

The pitch of the loaded song can be changed in semitone steps.

1. Press the [SAMPLER] button twice to make the button light in

green.

Pitch play mode is selected.

2. Press a performance pad to change the pitch.

change

Semitone

down

Pitch is raised in semitone steps

Pitch is lowered in

semitone steps

Velocity Sampler Operations

The functionality is the same as in sampler mode, but when you press a

pad, the sample’s playback volume changes depending on how strongly

you press the pad.

1. Hold down the [SHIFT] button and press the [SAMPLER] button

to make the button light in purple.

Velocity sampler mode is selected.

2. Press a performance pad.

The sample of the slot assigned to the pad you press is played.

The more strongly you press the pad, the louder the sample’s playback

volume.

Slip Operations

If slip is on, the song continues to progress in the background even during

scratch play, loop playback, or hot cue playback.

When you cancel scratch play, loop playback, or hot cue playback, the song

playback resumes from the position to which playback had progressed

until that time.

This allows a variety of DJ performance techniques without stopping the

ow of the song.

1. Press the [SLIP] button to make the button light.

Slip mode is selected.

The button blinks while the song is progressing in the background.

Song Analysis

Song analysis begins when you press the DJ-505’s [LOAD] button to load

a song into a deck, but if you’re using Serato DJ as an oine player (i.e.,

without the DJ-505 being connected), you can analyze songs ahead of

time.

If analysis is nished for a song, the BPM and waveform are displayed

immediately after you load that song into a deck.

For details on how to analyze songs with the oine player, refer to the Serato DJ

owner’s manual.

* Depending on the number of songs, analysis might take some time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-505 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info