Bedienungsanleitung Roland DJ-505 (Seite 16 von 32) (Englisch)

710374

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-505

Eect Operations

Serato DJ has two eect units (FX1, FX2) which you can use with the

selected deck.

DJ-FX panel

When you click “FX” in the upper left of Serato DJ’s main screen, the DJ-FX

panel opens.

Multi FX mode

You can select up to three eects for each eect unit.

1 1 1 2 3

4 5 4 5 4 5

Single FX mode

You can select one eect for each eect unit, and control multiple

parameters of the selected eect.

2 3

4 5 6 6 6 6

Currently selected eect type

Time at which the eect is applied

Number of the deck that uses the eect unit is highlighted

Eect on/o status (highlighted when on)

Eect depth

Eect parameters and settings

Multi FX Mode Operations

1. Hold down the [SHIFT] button and press the [TAP] button to

select multi FX mode.

Each time you press the button, you alternate between multi FX mode

and single FX mode.

2. In the CHANNEL ASSIGN area of the deck (channel) that you

want to operate, press the [1] or [2] button to select the eect

unit that you want to use.

In the DJ-FX panel of the Serato DJ screen, the number of the deck that

uses the eect unit is highlighted.

MEMO

By pressing the [TR/SAMPLER] button you can apply an eect to the

TR-S/sampler sound.

* In Serato DJ’s Sampler panel, set OUTPUT to “A.”

3. Hold down the [SHIFT] button and press an eect button to

select the eect type.

The eect type changes each time you press the button.

4. Press the eect button to turn the eect on (button lit).

5. Use the eect parameter knobs to adjust the eect depth.

6. Use the [BEATS] knob to adjust the time at which the eect is

applied.

* If you press the knob, the setting is set to “1.”

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Single FX Mode Operations

1. Hold down the [SHIFT] button and press the [TAP] button to

select single FX mode.

Each time you press the button, you alternate between single FX mode

and multi FX mode.

2. Press the [1] or [2] button of the deck (channel) that you want

to operate, to select the eect unit that will be used.

In the DJ-FX panel of the Serato DJ screen, the number of the deck that

uses the eect unit is highlighted.

MEMO

By pressing the [TR/SAMPLER] button you can apply an eect to the

TR-S/sampler sound.

* In Serato DJ’s Sampler panel, set OUTPUT to “A.”

3. Hold down the [SHIFT] button and press the eect 1 button to

select the eect type.

It does not matter which eect button you press.

The eect type changes each time you press the button.

4. Press the eect 1 button to turn the eect on (button lit).

5. Press the eect 2 or 3 button to switch the value of the eect

parameters.

6. Use the eect parameter 2 or 3 knobs to adjust the value of the

eect parameters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-505 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info