757755
8
Zoom out
Zoom in
Vorherige Seite
1/111
Nächste Seite
to Contents
5 LFO1/2LFO1/2
Waveform buttons
Selects the waveform of the LFO.
Sine wave
Triangle wave
Sawtooth wave
Sawtooth wave (negative polarity)
Square wave
Random wave
Trapezoidal wave
Sample & Hold wave (one time per
cycle, LFO value is changed)
Chaos wave
Modied sine wave. The amplitude
of asine wave is randomly varied
once eachcycle.
A waveform generated by the data
specied by LFO Step 1–16. This
produces stepped change with
a xed pattern similar to a step
modulator.
[TEMPO SYNC] button
Set this ON if you want the LFO rate to synchronize with
the tempo.
[KEY TRIGGER] button
Species whether the LFO cycle will be synchronized to
begin when the key is pressed (ON) or not (OFF).
RATE
If Rate Sync is OFF, this species the LFO rate independently
of the tempo. Increasing this value shortens the cycle
of the LFO.
If Rate Sync is ON, this species the LFO rate as a note value.
DELAY TIME
Species the time elapsed before the LFO eect is applied
(the eect continues) after the key is pressed (or released).
* After referring to “How to Apply the LFO, change the
setting until the desired eect is achieved.
FADE TIME
Species the time over which the LFO amplitude will reach
the maximum (minimum).
* After referring to “How to Apply the LFO, change the
setting until the desired eect is achieved.
OFFSET
Raises or lowers the LFO waveform relative to the central
value (pitch or cuto frequency). Positive (+) value will
move the waveform so that modulation will occur from
the central value upward. Negative (-) value will move the
waveform so that modulation will occur from the central
value downward.
PARTIAL 1–4 [L] button
Turn each partial on/o.
* These are shown only in the module layout.
[LFO 1] [LFO 2] buttons
Select the LFO that is shown in the screen.
If STEP is selected for LFO
[TEMPO SYNC] button
Set this ON if you want the LFO rate to synchronize with
the tempo.
[KEY TRIGGER] button
Species whether the LFO cycle will be synchronized to
begin when the key is pressed (ON) or not (OFF).
RATE
If Rate Sync is OFF, the LFO rate is specied independently
of the tempo. Increasing this value shortens the cycle
of the LFO.
If Rate Sync is ON, this species the LFO rate as a note
value.
DELAY TIME
Species the time elapsed before the LFO eect is applied
(the eect continues) after the key is pressed (or released).
* After referring to “How to Apply the LFO, change the
setting until the desired eect is achieved.
FADE TIME
Species the time over which the LFO amplitude will reach
the maximum (minimum).
* After referring to “How to Apply the LFO, change the
setting until the desired eect is achieved.
OFFSET
Raises or lowers the LFO waveform relative to the central
value (pitch or cuto frequency). Positive (+) value will
move the waveform so that modulation will occur from
the central value upward. Negative (-) value will move the
waveform so that modulation will occur from the central
value downward.
LENGTH (upper bar)
Species the number of steps. The active steps are
highlighted.
Waveform display for each step
When you click the 9 (step number) below the waveform,
a popup appears, allowing you to select the waveform
of that step.
You can change the Step Level by dragging the waveform
up/down.
How to Apply the LFO
Apply the LFO gradually after the key is pressed
Fade Mod (Fade Mode) : ON-IN
Note on
high (more)
low (less)
Pitch
Cuto Frequency
Level
Pan
Delay
Time Fade Time
Depth
Apply the LFO immediately when the key is pressed, and then gradually begin to decrease the eect
Fade Mod (Fade Mode) : ON-OUT
high (more)
low (less)
Pitch
Cuto Frequency
Level
Pan
Note on
Delay Time Fade Time
Depth
Apply the LFO gradually after the key is released
Fade Mod (Fade Mode) : OFF-IN
high (more)
low (less)
Delay
Time Fade Time
Depth
Note
o
Note
on
Pitch
Cuto Frequency
Level
Pan
Apply the LFO from when the key is pressed until it is released, and gradually begin to decrease
the eect when the key is released
Fade Mod (Fade Mode) : OFF-OUT
Note on
high (more)
low (less)
Delay
Time Fade Time
Depth
Note o
Pitch
Cuto Frequency
Level
Pan
Time
PRO EDIT parameters (STEP LFO1/STEP LFO2)
Step Length
1–16 This is eective if Waveform is STEP.
Species the step size that is looped.
Step 1-16
-72–+72
This is eective if Waveform is STEP.
Specify the Depth value of each step.
If you want to specify this in pitch scale
degrees (100 cents), the settings are as
follows.
11Pitch Depth: 51, Step: multiples of 6 … up to
one octave of change
22Pitch Depth: 74, Step: multiples of 3 … up to
two octaves of change
33Pitch Depth: 89, Step: multiples of 2 … up to
three octaves of change
* If OSC Type is not VA, the Pitch Depth
setting range is limited to -63–+63, so
only “1” above is possible.
Step Curve 1-16
0–36 Species the type of curve at each step.
& “Step curve types
Step curve types
Curve Type 0
Curve Type 1–6 (variations of square wave)
1 2
5 6
3 4
Curve Type 7–10 (variations of ascending saw)
7 8 9 10
Curve Type 11–15 (variations of descending saw)
11
15
12 13 14
Curve Type 16–19 (variations of ascending exponential)
16 17 18 19
Curve Type 20–23 (variations of descending exponential)
20 21 22 23
Curve Type 24–27 (variations of ascending charging curve)
24 25 26 27
Curve Type 28–31 (variations of descending charging curve)
28 29 30 31
Curve Type 32–36 (other variations)
32 33 34 35
36
4 OSCOSC
OSC common
OSC Type
Species the oscillator type.
[PCM]
PCM is used.
Click to open the Wave Browser.
You can use bank and category to
narrow the search results, or use
keyword search to select a wave.
[VA] A numerically calculated analog-
modeled wave is generated.
[PCM SYNC]
A PCM wave that allows an
oscillator sync eect with
STRUCTURE = SYNC is used.
[SUPER SAW] SuperSAW is used.
[NOISE] White noise is used.
PARTIAL 1–4 [L] button
Turn each partial on/o.
* These are shown only in the module layout.
[PCM]
PCM is used.
Click to open the Wave Browser. You can use bank and
category to narrow the search results, or use keyword
search to select a wave.
WAVE GAIN
Species the gain (amplitude) of the waveform.
The value will change in 6 dB (decibel) steps.
Each 6 dB increase doubles the gain.
[STEREO (L+1) ] button
Turn this on if you want to use the wave in stereo. Wave
Number R is specied automatically (the wave that follows
Wave Number L).
This turns o if you select [MONO] or if you select a wave
for R that is other than L+1.
[MONO] button
Selects monophonic performance (MONO).
Sound only the last-played key one at a time.
[VA]
A numerically calculated analog-modeled wave is
generated.
[
] Sawtooth wave
[U] Square wave
[S] Triangle wave
[R] Sine wave
[RAMP] Ramp wave
[JUNO] Modulated sawtooth wave
[S2] Triangle wave variation
[S3] Triangle wave variation
[R2] Sine wave variation
WAVE GAIN
Species the gain (amplitude) of the waveform.
The value will change in 6 dB (decibel) steps.
Each 6 dB increase doubles the gain.
PULSE WIDTH
This eect is produced when the waveform is deformed by
varying the duty cycle of the pulse width.
It is also eective with waveforms other than SQR (square
wave).
* If the value is 64, the pulse width has a 50%:50% duty
cycle.
PWM DEPTH (LFO2)
Species the amount (depth) of LFO applied to PW
(Pulse Width).
PW is modulated according to the LFO2 setting.
FAT
Boosts the low-frequency region.
INVERT
If this is ON, the phase of the VA waveform is inverted.
[PCM SYNC]
Produces the wave of the specied waveform.
PCM SYNC is eective if specied as Slave when the
structure is SYNC (the sync-modulated partial is 1 or 3).
WAVE GAIN
Species the gain (amplitude) of the waveform.
The value will change in 6 dB (decibel) steps.
Each 6 dB increase doubles the gain.
[SUPER SAW]
SuperSAW is used.
WAVE GAIN
Species the gain (amplitude) of the waveform.
The value will change in 6 dB (decibel) steps.
Each 6 dB increase doubles the gain.
SUPER SAW DETUNE
Adjusts the Detune depth for SuperSAW.
Higher values produce a deeper Detune eect.
[NOISE]
White noise is used.
WAVE GAIN
Species the gain (amplitude) of the waveform.
The value will change in 6 dB (decibel) steps.
Each 6 dB increase doubles the gain.
Wave Browser
Keyword search
Lets you use keywords (multiple selections are allowed)
to further narrow the focus of the displayed result.
WAVE list
WAVE information
Shows the category, category thumbnail, sound number,
and sound name of the selected WAVE.
Bank list
Shows a list of the banks that you own.
The contents of the bank selected here are shown in the wave
list in the center.
Multiple banks can be selected simultaneously.
5Drag to select a region.
5Click while holding down the Ctrl key (Windows).
5Click while holding down the Command key (Mac).
To de-select a currently selected bank, click it again. If no bank
is selected, All (all banks) are shown.
Category lter
Filters the WAVE list by category.
Multiple lters can be selected
simultaneously.
5Drag to select a region.
5Click while holding down the
Ctrl key (Windows).
5Click while holding down the
Command key (Mac).
“ i ” symbol
When you place the mouse cursor (mouse pointer) over
this, a list of shortcuts appears.
PRO EDIT parameters (OSC)
OSC Type
Species the oscillator type.
PCM PCM is used.
VA A numerically calculated analog-
modeled wave is generated.
PCM-Sync
A PCM wave that allows an oscillator
sync eect with STRUCTURE = SYNC is
used.
SuperSAW SuperSAW is used.
Noise White noise is used.
Wave Bank
INT_A, INT_B,
INT_C, ...
This is the bank name of the wave that
is sounded when the OSC Type is PCM.
Wave L/R
Species the wave that is sounded when OSC Type is PCM.
If using mono, specify only the left side (L). If using stereo,
specify the right side (R) as well.
If using mono, specify only Wave L and leave Wave R
at 0: OFF.
If you specify only Wave R, no sound is heard.
VA Waveform
Species the wave that is used when OSC Type is VA.
SAW Sawtooth wave
SQR Square wave
TRI Triangle wave
SIN sine wave
RAMP Ramp wave
JUNO Modulated sawtooth wave
TRI2 Triangle wave variation
TRI3 Triangle wave variation
SIN2 Sine wave variation
VA Waveform Invert Sw
OFF, ON If this is ON, the phase of the VA
waveform is inverted.
PCM-Sync Wave Name
Species the wave that is used when OSC Type is PCM-Sync.
The PCM-Sync oscillator is eective when specied as the
Slave (the sync-modulated partial 1 or 3) when Structure
is set to SYNC.
Gain
-18–+12 [dB]
Species the gain (amplitude) of the
waveform.
The value will change in 6 dB (decibel)
steps.
Each 6 dB increase doubles the gain.
Pulse Width
0–127
This eect is produced when the
waveform is deformed by varying the
duty cycle of the pulse width.
It is eective when OSC Type is VA, and
is also eective with waveforms other
than SQR (square wave).
* If the value is 64, the pulse width has
a 50%:50% duty cycle.
PWM Depth
-63–+63
Species the amount (depth) of LFO
applied to PW (Pulse Width).
PW is modulated according to the LFO2
setting.
SuperSAW Detune
0–127
Adjusts the Detune depth for SuperSAW.
Higher values produce a deeper Detune
eect.
* This is eective only when SuperSAW
is selected as the OSC Type.
Click Type
SOFT
Changes the sense of attack by varying
the position at which the sound starts.
This is available if OSC Type is VA.
However, HARD is eective only when
Waveform is TRI, TRI2, SIN, or SIN2.
HARD
NATURAL
OFF
Fat
0–127 Boosts the low-frequency region.
This is eective if OSC Type is VA.
OSC Attenuator
0–255
Species the OSC level.
255 is the reference value. If you want
only the self-oscillation of the lter to
be heard, set this to 0.
FXM Switch
OFF, ON
This sets whether FXM will be used (ON)
or not (OFF).
* FXM (Frequency Cross Modulation)
uses a specied waveform to apply
frequency modulation to the currently
selected waveform, creating complex
overtones. This is useful for creating
dramatic sounds or sound eects.
FXM Color
1–4
Species how FXM will perform
frequency modulation. Higher settings
result in a grainier sound, while lower
settings result in a more metallic sound.
FXM Depth
0–16 Species the depth of the modulation
produced by FXM.
Delay Mode
Partial Delay
This produces a time delay between the moment a key is
pressed (or released), and the moment the partial actually
begins to sound. You can also make settings that shift the
timing at which each partial is sounded.
By modifying the tonal character of the partial that is
sounded with a delay, or by modifying the pitch for each
partial, you can produce arpeggio-like performances by
pressing a single key. The partial delay time can also be
synchronized to the tempo.
If Legato Retrigger Interval is other than OFF, legato
operation occurs only when Delay Mode is NORMAL.
Also in this case, Legato Retrigger Interval operates as 0
(retriggers at each Delay Time).
NORMAL
The partial begins to play after the
time specied in the Partial Delay Time
parameter has elapsed.
Note o
Delay time
Note on
No Partial Delay
HOLD
Although the partial begins to play
after the time specied in the Partial
Delay Time parameter has elapsed,
if the key is released before the time
specied in the Partial Delay Time
parameter has elapsed, the partial is
not played.
Note o
Delay time
Note on
No sound
played
KEY-OFF-
NORMAL
Rather than being played while the key
is pressed, the partial begins to play
once the period of time specied in
the Partial Delay Time parameter has
elapsed after release of the key.
This is eective in situations such as
when simulating noises from guitars
and other instruments.
Note o
Delay time
Note on
KEY-OFF-
DECAY
Rather than being played while the key
is pressed, the partial begins to play
once the period of time specied in
the Partial Delay Time parameter has
elapsed after release of the key. Here,
however, changes in the Amp Envelope
begin while the key is pressed, which
in many cases means that only the
sound from the release portion of the
envelope is heard.
Note o
Delay time
Note on
Delay Time Sync
OFF, ON Set this ON if you want the partial delay
time to synchronize with the tempo.
Delay Time
(note)
1/64T–2
This is available when Delay Time Sync
is ON. It species the delay time in
terms of a note value.
Delay Time
0–1023
This is available when Delay Time
Sync is OFF. It species the delay time
without regard to the tempo.
Wave Tempo Sync
OFF, ON
Adjust wave playback to the tempo.
Valid only when you select a Wave with
BPM. When this feature is enabled, the
parameters associated with pitch and
FXM are disabled, and for the carrier
side of the XMOD, the XMOD eect is
disabled.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland Zenology wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info