Bedienungsanleitung Rotel rdv 1080 (Seite 17 von 28) (Englisch)

139017

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Selecting Subtitles

SUBTITLE Button

Some DVD Video, DVD Audio, and Video CD/

SVCD discs can display subtitles in various lan-

guages during playback. Subtitled recordings

are indicated by a

icon at the beginning

of the scene. There are two ways to select the

subtitle display.

From the normal screen:

• Press the SUBTITLE button on the remote.

The following icons appear indicating that

the second of three available subtitle lan-

guages is selected:

• Press the SUBTITLE button again or press

the CURSOR

buttons to change to

the next available subtitle language. Each

press will skip to the next option, includ-

ing turning the subtitles off.

From the On-Screen Display:

• Press the ON-SCREEN button to show the

DVD CONTROL screen.

• Use the CURSOR

buttons to move the

over the subtitle field as shown above.

• Press the SUBTITLE button or the CURSOR

buttons to change to the next avail-

able subtitle option.

• Press the ON-SCREEN button to close the

display window.

NOTE

: The position of the subtitle field differs

slightly on SVCD screens. SVCD discs always

have four subtitle options (plus off) to cycle

through, even if there are no subtitles avail-

able in some of the positions.

NOTE

: See the list of abbreviations used for

languages in Figure 7.

NOTE

: If the icon appears, subtitles are not

available.

Adjusting the Picture

TH POSITION Button

When playing video discs, the RDV-1080

provides picture adjustments, much like the

video controls on a TV monitor. The unit stores

four sets of adjustments, which can be selected

according to personal preference.

To adjust these picture controls: When

a video image is being displayed, press the

TH POSITION button on the remote. The fol-

lowing adjustment screen appears:

There are four presets (groups of settings) in-

dicated as tabs with the active preset high-

lighted. NORMAL and CINEMA are factory

presets and cannot be adjusted. USER1 and

USER2 presets can be used to store custom

settings.

To change presets: Press the TH POSITION

button again, cycling through until you reach

the desired tab.

There are seven adjustable parameters in a

preset, with the selected parameter on the left

side of the display:

• Brightness controls the overall brightness

of the picture.

• Contrast determines the difference be-

tween the lightest and darkest tones.

• Sharpness controls picture detail.

• Gamma changes the brightness of mid-

tones without altering dark or light tones.

• Tint controls overall color balance.

• Color determines how saturated or vibrant

the colors appear.

• Y Delay determines color gap of the dis-

play.

To select a parameter: Press one of the

CURSOR

buttons. Each press will cycle

through to the next option, as shown on the

screen display.

To adjust a parameter: Press one of the

CURSOR

buttons to increase or decrease

the setting, as shown on the bar graph on the

screen display.

To close the adjustment window: Press

the ENTER button. The window will automati-

cally close following 10 seconds of inactivity.

Virtual Surround Sound

VSS Button

When playing Dolby Digital sources on a 2-

channel stereo or TV, the VSS (Virtual Surround

Sound) feature can simulate the 3-dimensional

effects of a surround sound system.

NOTE

: VSS only works on Dolby Digital source

material containing rear surround signals. The

VSS feature does not change the signal avail-

able at the digital outputs. When used, VSS

overrides the downmix and compression fea-

tures that may be activated for Dolby Digital

To activate the VSS feature: During play-

back, press the VSS button on the remote. A

display window appears on screen with the

current VSS mode shown on the left side.

There are four settings for VSS:

• Action is suitable for action films and sports

where sounds move around the room

• Drama provides warm, natural sound.

• Theater simulates the sound of a good

movie theater.

• Off deactivates the VSS feature.

To change settings: Press the VSS button

again, cycling through until the desired effect

appears on the display window.

To adjust the intensity of the effect: The

intensity of each VSS effect can be increased

or decreased in five steps as shown on the

bar graph in the display window. Press one

of the CURSOR buttons to change the

intensity.

To close the adjustment window: Press

the ENTER button. The window will automati-

cally close following 10 seconds of inactivity.

Playing Specific Selections

The RDV-1080 provides a several methods for

locating specific selections from a disc. The

simplest method, using the TRACK

buttons, is covered in the

Basic Operations

topic. This section details additional methods,

such as finding a selection with the disc menu,

the On-Screen Display, or the Digest (thumb-

nail images of the disc’s content). Also cov-

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1080 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info