Bedienungsanleitung Rotel RSX-1056 (Seite 17 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

VIDEO 1–5

Composite Video Inputs

Five inputs accepts standard composite video

signals from source components using stan-

dard 75 ohm RCA video cables.

VIDEO 1–3

Composite Video Outputs

Three RCA jacks, labeled COMPOSITE OUT

1–3, provide connections for sending compos-

ite video signals for recording on a VCR or

other recording device.

These connections correspond to the VIDEO

IN 1-3 connections. Make sure that you are

consistent. If you hook up a particular VCR to

the VIDEO 1 inputs, hook up the VIDEO 1 output

to the same VCR.

NOTE

: The RSX-1056 cannot convert S-Video

or Component Video to composite video.

Therefore, only signals from the composite

video inputs are available at these outputs.

VIDEO 1–5 S-Video Inputs

Five inputs, labeled S-VIDEO IN 1–5 accept

S-Video signals from source components.

VIDEO 1–3 S-Video Outputs

Three S-VIDEO jacks, labeled S-VIDEO OUT

1–3, provide connections for sending S-Video

signals for recording on a VCR or other re-

cording device.

These connections correspond to the VIDEO

IN 1-3 connections. Make sure that you are

consistent. If you hook up a particular VCR to

the VIDEO 1 inputs, hook up the VIDEO 1 output

to the same VCR.

NOTE

: The RSX-1056 cannot convert compos-

ite video or Component Video signals to

S-Video. Only signals received at the S-Video

inputs are available at these outputs.

VIDEO 1–3

Component Video Inputs

Component Video connections split the video

into three signals – luminance (Y) and chromi-

nance (P

B and PR) signals, allowing delivery

of a reference quality picture with high defi-

nition signals. Component Video connections

should be used for progressive scan DVD play-

ers and high-definition television receivers. Each

of these signals is carried by a separate 75

ohm video cable with RCA connectors.

Three sets of inputs, labeled COMPONENT

VIDEO IN 1–3 accept Component video sig-

nals from source components.

NOTE

: When using a progressive scan or

1080i HDTV video signal from the Compo-

nent Video inputs, the TV monitor cannot dis-

play the video signal and the OSD menus at

the same time. A “progressive” setting in the

Other Options setup menu allows the use of

the main OSD setup menus, even with pro-

gressive or HDTV signals. When the main

OSD setup menus are displayed, the progres-

sive video signal is interrupted and restored

when the OSD menus are cancelled. The tem-

porary OSD information displays (such as vol-

ume setting, etc.) are not displayed.

TV Monitor Outputs

The TV MONITOR outputs of the RSX-1056

send the video signal to your TV monitor. Three

types of video output connections are provided

– RCA composite video, S-Video, and Com-

ponent Video.

The composite video output only sends signals

from composite video inputs to the TV moni-

tor. The S-Video output only sends signals from

S-Video video inputs to the TV. The Compo-

nent Video output converts signals from ANY

type of source input to the TV. If you have

connected all of your source components with

the same type of connection, then you only

need to make one connection from the

RSX-1056 to the TV monitor. If you connect

the RSX-1056 to the TV monitor with Compo-

nent Video connections, you also only need

to make one type of connection because com-

posite and S-Video signals are converted to

Component Video.

NOTE

: When a video input or inputs are se-

lected for progressive mode on the Other

Options menu, the conversion from compos-

ite or S-Video to Component Video output is

not available for those inputs. The conversion

from composite or S-VIDEO to Component

Video output is only available for the other

video inputs.

ZONE OUT Video Output

The ZONE OUT Video output of the RSX-1056

sends a composite video signal to a TV moni-

tor in Zone 2.

NOTE

: Only composite video input signals are

available at the Zone 2 video output.

Digital Audio

Input & Outputs

The RSX-1056 provides digital connections

which may be used in place of, or in addi-

tion to, the analog audio input and output con-

nections described in the previous sections.

These connections include five digital inputs

and two digital outputs (for recording).

These digital connections can be used with

any source component that supplies a digital

signal, such as a DVD player, CD player, or

satellite TV tuner.

NOTE

: With a digital connection, the RSX-1056

will be used to decode the signal, rather than

the source component’s internal decoders. In

general, you must use digital connections for

a DVD player or other component that sup-

plies a Dolby Digital or DTS signal; other-

wise the RSX-1056 will not be able to decode

these formats.

Digital Inputs

The RSX-1056 accepts digital inputs from source

components such as CD players, satellite TV

tuners, and DVD players. The built-in digital

processor senses and adjusts to the correct sam-

pling rates.

There are five digital inputs on the rear panel,

three coaxial and two optical. These digital

inputs can be assigned to any of the input

sources using the INPUT SETUP screen during

the setup process. For example, you can as-

sign the COAXIAL 1 digital input connector

to the VIDEO 1 source and the OPTICAL 2

digital input to the VIDEO 3 source.

Rotel RSX-1056 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info