Bedienungsanleitung Rotel RSX-1056 (Seite 23 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

Surround Mode Buttons

Five buttons on the remote (2CH, PLC, PLM,

5CH, 7CH) and four buttons on the front panel

(2CH, DOLBY PLII/3ST, DTS/Neo 6, DSP) allow

direct selection of certain surround modes. The

function of these buttons varies depending on

the type of recording being played. See the

Manually Selecting Surround Modes

section

for detailed information.

SUR+ Button

This button on the remote is used in conjunc-

tion with the +/– buttons for manual selection

of surround modes and features. See the

Manu-

ally Selecting Surround Modes

section for in-

formation.

DYN Button

Used the DYN button on the remote to select

the dynamic range control setting in Dolby Digi-

tal surround mode.

MENU/OSD Button

Push this button on the remote to turn on the

OSD menu system. If the menu system is al-

ready visible, push this button to cancel the

display. Press and hold the button to turn off

the front panel display.

ENTER Button

The ENTER button is used to confirm and

memorize various settings in the setup and

operation of the RSX-1056. Its use is described

in detail in the relevant sections.

BAND Buttons

Press either of the BAND buttons to toggle be-

tween AM and FM reception.

TUNING Buttons

The TUNING buttons (labeled CH UP/DOWN

on the remote control) provide three different

tuning functions, depending on the mode of

operation: frequency tuning, preset tuning, or

selection of an RDS/RBDS program type.

MEMORY Button

The front panel MEMORY button is used with

the NUMERIC buttons to store station presets.

NUMERIC Buttons

The NUMERIC buttons on the front panel or

the remote are used to enter the number of a

memorized station preset or for direct entry

of a station frequency.

DIRECT Button

FRQ DIRECT Button

The front panel DIRECT and remote control FRQ

DIRECT buttons are used in conjunction with

the NUMERIC buttons for direct entry of a sta-

tion frequency in AM/FM tuning.

MONO Button

FM MONO Button

The front panel MONO and remote control

FM MONO buttons change the FM mode from

stereo reception to mono reception.

TUNE Button

PRESET Button

P-TUN Button

The TUNE, PRESET, and P-TUN buttons on the

remote are used to select FREQUENCY tun-

ing or PRESET tuning modes. The TUNE and

PRESET buttons select the modes directly. The

P-TUN button toggles between the two modes.

SCAN Button

Preset scan tuning automatically scans through

the memorized station presets, playing each

for 5 seconds. Press the SCAN button on the

remote to begin preset scanning. Press the but-

ton again to stop the scanning and listen to

the desired preset.

RDS/RBDS Buttons

Four remote control buttons (DISP, PTY, TP, TA)

are used to activate various RDS/RBDS tun-

ing features. See the

RDB/RBDS Tuning

sec-

tion of the manual for detailed information.

Basic Operations

This section covers the basic operating con-

trols of the RSX-1056 and the remote.

Power and Standby On/Off

The rear panel POWER switch on the RSX-1056

is a master power switch. The button must be

in the ON position for the unit to operate. When

it is in the OFF position, the unit is fully off and

cannot be activated from the front panel or

remote control.

In normal operation, the rear panel POWER

switch is always left in the ON position. The

RSX-1056 is activated and deactivated using

the front panel STANDBY button, the remote

control POWER button, or the remote ON/

OFF buttons. When activated, the RSX-1056

is fully functional and the front panel display

illuminated. When deactivated, the unit goes

into a standby mode, with minimal power

applied to the microprocessor.

NOTE

: When the unit has AC power applied

and the rear panel POWER switch is on, the

front panel STANDBY LED lights, regardless

of whether the unit is in standby mode or

activated.

The front panel STANDBY button and the re-

mote control POWER button function as toggle

switches. Press either button to activate the unit.

Press either button again to put the unit in

standby mode.

The ON/OFF buttons on the remote serve the

same function, but provide discrete ON (ac-

tive) or OFF (standby) commands.

When using the Zone 2 capability of the

RSX-1056, the standby activation is com-

pletely independent for the main room and

Zone 2. ON/OFF commands sent from the

remote in the main room will not affect Zone

2. Pressing the ON/OFF buttons on a remote

located in Zone 2 will only affect that zone

and not the main room. When the unit is ac-

tivated in ZONE 2, the ZONE 2 LED on the

front panel is lit.

There are three available power mode options,

which may be useful in configuring the

RSX-1056 for special system configurations.

See the

Other Options

menu in the

Setup

section

of this manual for additional details on changing

the default standby behavior.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RSX-1056 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info