Bedienungsanleitung Rotel RSX-1056 (Seite 24 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

RSX-1056 Surround Sound Receiver

Volume Adjustments

The listening volume of the RSX-1056 can be

adjusted from the front panel or the remote.

Front Panel: Rotate the front panel VOLUME

knob clockwise to increase the volume, coun-

terclockwise to decrease.

Remote: Press the VOL UP button to increase

the volume; press the VOL DOWN button to

decrease.

When you adjust the volume, the setting is

shown on the TV monitor and/or the front panel

display. The current volume setting is also shown

on the SYSTEM STATUS OSD screen.

NOTE

: The VOLUME controls can be used to

change the volume in Zone 2. Press the front-

panel or remote control ZONE button and

adjust the volume. After 10 seconds, the

VOLUME control reverts to normal operation.

Muting the Sound

The volume of the RSX-1056 can be turned

off or muted. Push the MUTE button on the front

panel or the remote once to turn the sound

off. A MUTE indication appears in the OSD

and the front panel displays. Press the MUTE

button again or adjust the volume settings to

restore output levels.

Selecting Inputs

Input Buttons

You can select any of nine source inputs for

listening and/or watching: CD, TUNER, TAPE,

VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO

5, or MULTI INPUT.

The front-panel display and the ON-SCREEN

DISPLAY show the name of the current listen-

ing source selection. The labels for VIDEO

sources can be customized to match your

components.

NOTE

: When the TUNER input source button

is pressed, the frequency of the currently tuned

station is displayed. Pressing the button again

toggles the display to show the word TUNER

instead of the frequency display.

All of the source inputs can be customized using

the ON-SCREEN DISPLAY configuration menus

to accept either analog signals or digital sig-

nals from one of the five assignable digital

inputs. When a digital input is assigned, the

RSX-1056 checks for the presence of a digi-

tal signal at that input. If a digital signal is present

when the source is selected, it is automatically

activated and the proper surround mode en-

abled. If no digital signal is present, the ana-

log inputs for that source are selected. This

auto-sensing is the preferred configuration for

digital source inputs such as DVD players.

When an ANALOG input is assigned, the unit

will not access a digital signal, even though

one may be available at the digital input.

By default, the source input buttons are fac-

tory configured to select the following inputs:

CD: Analog input

Tuner: Analog (built-in)

Tape: Analog input

Video 1: Digital Coaxial 1

Video 2: Digital Coaxial 2

Video 3: Digital Coaxial 3

Video 4: Digital Optical 1

Video 5: Digital Optical 2

Each source input should be configured us-

ing the ON-SCREEN DISPLAY menu system to

use the desired input type (analog or digital

auto-sensing). See the INPUT MENU section

for configuration instructions.

NOTE

: In addition to selecting analog or digital

signals, the configuration options also permit

custom labeling and selection of a default sur-

round mode for each of the eight inputs.

The input source buttons can also be used (with

the REC button described in the next section)

to select an analog input source signal to be

available at the outputs for recording. Addi-

tionally, the input source buttons can be used

with the ZONE button to select an analog input

source for ZONE 2.

Selecting a Source Input from

the Front Panel

To select a source for LISTENING: Press

one of the eight INPUT buttons or the MULTI

INPUT button.

To select a source for RECORDING: Press

the REC button and then press one of the eight

INPUT buttons within 10 seconds.

To select a source for Zone 2: Press the

ZONE button and then press one of the IN-

PUT buttons within 10 seconds.

NOTE

: See the section on Zone 2 operations

for details of selecting a source for the re-

mote zone.

Selecting a Source from the

Remote

To select a source for LISTENING in the

main room: press and hold one of the DE-

VICE/INPUT buttons for more than one sec-

ond. To select the MULTI INPUT, press and hold

the EXT button.

NOTE

: A short press of a DEVICE/INPUT but-

ton changes the remote control device only,

but does not change the source input.

To select a source for RECORDING: Press

the REC button. Then, press and hold one of

the DEVICE/INPUT buttons within 10 seconds.

Alternatively, you can press the REC button and

then use the +/– buttons to scroll through the

available source options. Select any input (CD,

TUNER, TAPE, or VIDEO 1–5). Selecting the

SOURCE option links the recording source to

the input selected for main room listening.

Whatever input is selected for listening is also

sent to the record outputs.

To select a source for Zone 2: Press the

ZONE button. Then, press and hold one of

the DEVICE/INPUT buttons within 10 seconds.

Alternatively, you can press the ZONE button

and then use the +/– buttons to scroll through

the available source options. Select any input

(CD, TUNER, TAPE, or VIDEO 1–5). Select-

ing the SOURCE option links the Zone 2 source

to the input selected for main room listening.

Whatever input is selected for the main room

is also sent to the Zone 2 outputs.

Selecting Digital Inputs

A default digital audio input can be specified

for each source input using the

Input Setup

menu. However, you can override the default

digital input for the currently selected source

by pressing the D-SLT button on the remote.

Each press of the button steps to the next digital

input in order: OPTICAL 1, OPTICAL 2, CO-

AXIAL 1, COAXIAL2, COAXIAL 3. The actual

choices you see will be limited to those inputs

with an active digital signal connected, so you

may not see all of the inputs listed.

Rotel RSX-1056 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info