Bedienungsanleitung Rupes MX800 (Seite 13 von 53) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

489883

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

spring tension and slide up or down to select the

desired range. Ensure that the gears engage

fully. It is sometimes helpful to turn the arbor sli-

ghtly to allow the gears to fully engage.

NOTE

: Please switch the machine “Off” before

changing the gears.

HOW TO USE THE TOOL

Effective control of this machine requires two-

handed operation for maximum protection and

resistance to the start-up and operating torque.

Place the work properly and to hold the machine

firmly WITH BOTH HANDS to prevent loss of

control which could cause personal injury.

Protect your eyes from injury with safety glasses

or goggles.

WARNING: Keep the cord behind the ope-

rator and away from mixing area to prevent it

from becoming entangled in the paddle.

Handles

The handles of the

Electric Stirrer are

designed for an

optimum grip. It

allows the opera-

tor to work comfor-

tably for extented

periods of opera-

tion.

Handles Placing Position

Please pay atten-

tion when placing

the Electric Stirrer

on the ground.

Please see correct

positioning of the

Stirrer.

CAUTION

Incorrect placing

of the unit on the

ground (ie. placing

with the cable

pointing down)

may cause dama

ge to the power

supply cable,

increasing the

possibility of electric shock and damage to the

machine.

MAINTENANCE

WARNING: To reduce the risk of injury from

unexpected starting or electrical shock, unplug

the power cord before working on the machine.

Keep the tool clean. Remove accumulated dust

from working parts. Make sure that the tool ope-

rates properly. Periodically check screws and

bolts for tightness.

Keeping Tool Clean

Periodically blow out all air passages with dry

compressed air every 100 hours of use. All pla-

stic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts.

They could possibly dissolve or otherwise dama-

ge the material. Wear safety glasses while using

compressed air. Every 200 hours, have the lubri-

cant in the gearbox replaced by a qualified servi-

ce center.

Replacing Carbon Brushes

The carbon brushes furnished will last approxi-

mately 50 hours of running time or 10,000 on/off

cycles. Replace both carbon brushes when either

has less than 1/4" length of carbon remaining. To

inspect or replace brushes, first unplug the

machine. Unscrew the motor housing by remo-

ving the four screws. Pull back on the carbon

brush springs to release the tension. Unscrew

the screw holding the carbon brush lead. Then

pull out the brush. Repeat for the other side. To

reassemble reverse the procedure. The ears on

the metal end of the brush assembly go in the

same hole the carbon part fits into.

NOTE

: To reinstall the same brushes, first make

sure the brushes go back in the way they came

out. Otherwise a break-in period will occur that

will reduce motor performance and increase

brush wear. It is recommended that, at least once

a year, you take the tool to an Authorized Service

Center for a thorough cleaning and lubrication.

ARNING

: To ensure safety and reliability, all

repairs, with the exception of externally accessi-

ble brushes, should be performed at an

Authorized Service Center

At the end of its useful life, the product, pursuant

to European Directive 2002/96/CE and its imple

mentation in national law, must not be released

into the environment or thrown away as domestic

waste, but must be disposed of at authorised

recycling centres (contact the relevant local

authorities for a list of places where the product

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rupes MX800 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info