Bedienungsanleitung Sage BEM800 - the Scraper Mixer Pro (Seite 6 von 26) (Englisch)

617954

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

10 11

PAge heAder..... PAge heAder.....

Before ﬁrst use

Before using your bench mixer for the ﬁrst

time, remove any packaging material and

promotional labels. Ensure the speed control

dial is in the OFF position, the mixer is

switched off at the power outlet and the

power cord is unplugged.

Remove the mixing bowl, beater, whisk and

dough hook and wash in warm soapy water

with a soft cloth. Rinse and dry thoroughly.

The bowl and the attachments may be

washed in the dishwasher.

When ﬁrst using your bench mixer, you may

notice an odour coming from the motor.

This is normal and will dissipate with use.

Attaching the bowl

1. To remove or insert the mixing bowl,

the mixer motor head must be raised

and locked into the open position.

2. Place the mixer on a level, dry bench

top. The mixer motor head should be

in the horizontal (closed) position

when moving. Raise the mixer motor

head by pressing the RELEASE

button.

ASSEMBLY & OPERATION

3. Lift the mixer motor head up until it

tilts back and locks into the

open position.

4. Insert the mixing bowl into the bowl

locking recess of the mixer stand

and turn clockwise until the bowl

locks securely into place.

ASSEMBLY & OPERATION

Attaching mixing and whisking tools

1. Raise the motor head by pressing the

RELEASE button.

2. Align the groove in the top of the

mixing attachment with the locking

pin on the spindle extending down

from the mixer motor head.

3. Push the attachment upwards and

turn clockwise until it locks securely

onto the locking pin on the spindle

(see Fig. 1).

Fig. 1

4. Lower the mixer motor head by

pressing the RELEASE button and

gently lowering the mixer motor

head until it locks into the closed

position.

5. The splash guard can now be

assembled if required. Slide the main

ring into position on top of bowl,

then assemble the pour spout.

Operating the mixer

Planetary mixing action

By replicating a similar mixing action used

by commercial mixers in bakeries and

patisseries, the Scraper Mixer Pro head

rotates around the bowl while rotating

the beater in the opposite direction. This

ensures a superior and thorough mixing

result without the need for a rotating bowl.

1. Ensure the speed control dial is set

to the OFF position, plug the cord

into a 220–240V power outlet and

switch the power ON at the power

outlet. The illuminated LED speed

indicator band will ﬂash and the

count up/down timer will display

0:00. The mixer is now ready.

2. Add ingredients to the mixing bowl

as indicated in the recipe.

3. Always begin mixing by selecting

a low speed setting on the speed

control dial. Starting on a low speed

will prevent ingredients splattering.

Increase the speed as suited to the

mixing task. The speed setting can

be adjusted during operation. If

necessary, stop the mixer during

operation and scrape any food

mixture down the sides of the

mixing bowl with a spatula.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage BEM800 - the Scraper Mixer Pro Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info